Diamond LOGIC LINE PLUS LD12/35-N Manual de instrucciones - Página 12

Navegue en línea o descargue pdf Manual de instrucciones para Horno Diamond LOGIC LINE PLUS LD12/35-N. Diamond LOGIC LINE PLUS LD12/35-N 13 páginas.
También para Diamond LOGIC LINE PLUS LD12/35-N: Manual de instrucciones (13 páginas)

Imprimir página
5
ALARM AND POSSIBLE FAULTS
Anomalies
The oven does not
switch on
The oven does not
switch on
The display is off in spite
of the main switch being
on position 1 and the
electric supply is in
order
"PF" on the display
Inner light bulb does not
switch on
Inner light bulb does not
switch on
Inner light bulb does not
switch on
The door is closed, but
fume comes out
The baking chamber
does not heat suitably
The baking chamber
does not heat suitably in
spite of the temperature
being set rightly
The temperature
continues going up over
the set by thermo/timer
The temperature
continues going up over
the set by thermostat
WORKING ANOMALIES
Possibile Causes
No electric Energy in the
net
Main switch off
(poasitioned on "0")
Digital thermostat
dfefected
Probe failure
Burned inner light bulb
Inner light bulb switch
defected
No electric supplì power
on the light bulb
Exhauster butterfly valve
closed
The set temperature are
too low
One or more heating
elements are defected
Power card contactors
contacts blocked (heating
elements always
supplied))
Thermostat conctas
defected
- 34 -
Solutions
Check the geneal contactor,
the socie, the plug, and the
supplì cable.
Rotate the main switch to
position "1"
Replace the digital thermostat
Replace probe
Replace inner light bulb
Replace light bulb switch
Check electric connection with
the light bulb
Open more the valve and
check the right functioning.
Set the right temperature
Replace the defecate heating
elements
Check and, if necessary,
replace coctators card
Check and if necessary
replace the thermostat