Chrysler 2004 Crossfire Manual - Página 15
Navegue en línea o descargue pdf Manual para Automóvil Chrysler 2004 Crossfire. Chrysler 2004 Crossfire 15 páginas.
Imprimir página
Setting the DRIVER
If a telephone with hands-free operation is installed,
the call is routed through the speaker system. The
setting DRIVER is used to set the appropriate
speaker side (left/right hand drive).
Call up the user menu. Press the right rotary
control/push button repeatedly until
D R I V E R
R
or
is displayed, depending on the
currently selected setting.
Now turn the right rotary/push button to select
D R I V E R L
D R I V E R R
(LHD) or
If the right rotary control/push button is pressed,
the menu item "Telephone mute characteristics" is
called up.
Telephone mute characteristics
If a telephone with hands-free operation is installed,
the call may be routed through the speaker system.
This eliminates the need for an additional speaker.
However, the signal lines (NF – telephone input and
earth – telephone input) must be connected to the
car radio.
D R I V E R
L
The following settings are available:
P H M U T E
•
A U D I O P H
•
Call up the user menu. Press the right rotary
control/push button repeatedly until
P H
M U T E
or
(RHD).
currently selected setting.
Now turn the right rotary control/push button to
A U D I O P H
select
If the right rotary control/push button is pressed,
the menu item "User memory (USER)" is called up.
- Switching radio to mute
- Telephone call via the car radio
A U D I O
is displayed, depending on the
P H M U T E
or
.
P H O N E
For both settings,
an incoming call.
The current audio source is muted. In this situation,
you can only change the volume and the sound
settings for the telephone call at the unit.
P H
is displayed in case of
6. User menu