Burndy Continental Industries thermOweld CRE-13 Instrucciones

Navegue en línea o descargue pdf Instrucciones para Cables y conectores Burndy Continental Industries thermOweld CRE-13. Burndy Continental Industries thermOweld CRE-13 2 páginas. Thermoweld grounding connections

Imprimir página
thermOweld
INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS - CABLE TO REBAR
CRE-7
Butt end of cable and rebar under center of tap hole. Follow
instructions on reverse side for proper use of copper shim
stock.
CRE-9
Butt end of cable and rebar together under center of tap
hole. Follow instructions on reverse side for proper use of
copper shim stock.
CRE-14
Butt cable against rebar as shown. Follow instructions on
reverse side for proper use of copper shim stock.
+1 (918) 627-5210 • 1-800-558-1373 • WWW.THERMOWELD.COM
ELECTRICAL GROUNDING • CATHODIC PROTECTION • ELECTRIC UTILITY • RAIL
®
The Contractors Choice
CRE-8
Butt end of cable and rebar under center of tap hole.
CRE-13
Butt cable against rebar as shown. Follow instructions on
reverse side for proper use of copper shim stock.
CRE-17
Place cable and rebar into mold as shown.
instructions on reverse side for proper use of copper shim
stock.
Tel. +1.800.558.1373
Tel. +1.918.627.5210
www.thermoweld.com
ECN 2552 REV "F" 03/05/13
Follow
34-5381-29