Aquasana Claryum AQ-MF-1 Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Sistemas de filtración de agua Aquasana Claryum AQ-MF-1. Aquasana Claryum AQ-MF-1 12 páginas. Under sink water filter
También para Aquasana Claryum AQ-MF-1: Manual del usuario (12 páginas)
Imprimir página
Disconnect Water Line and Connect Tubing
3
A. With an adjustable wrench, turn off and disconnect cold water
supply. Attach dual port adapter to shutoff valve and re-attach cold
water line to the dual port adapter.
NOTE: Do not over tighten dual port adapter as
this may result in a restriction of water flow.
B. Connect 3/8" tubing to the
bottom port of the dual port
adapter. Run the opposite
end of the tubing to the inlet
side of the system head
(marked "IN"), cut to length,
and push tubing into the inlet
until it stops.
C. Using the second piece of
3/8" tubing, connect one end
to the top port of the dual
port adapter and run it to the
right side of the system head
(marked "OUT") cut to length,
and push tubing into the
outlet until it stops.
NOTE: Use 3/8" quick connect elbows if necessary.
3
2
1
INSTALLATION STEPS
Inlet
Outlet
5