Panasonic AG-AC160A Series Manual de instrucciones - Página 7
Navegue en línea o descargue pdf Manual de instrucciones para Videocámara Panasonic AG-AC160A Series. Panasonic AG-AC160A Series 42 páginas. Broadcast-grade camera recorder with 22x zoom lens and 2.2 megapixel u.l.t. image sensor
También para Panasonic AG-AC160A Series: Folleto (12 páginas), Manual rápido (1 páginas), Manual paso a paso (8 páginas)
Imprimir página
For AG-AC160AEN Only
Caution for AC Mains Lead
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This product is equipped with 2 types of AC mains cable, Type C and Type BF.
Appropriate mains cable must be used in each local area, since the other type of mains cable is
not suitable.
TYPE C
For AG-AC160AEJ/AG-AC160AEN Only
EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS
1. Applicable standards and operating environment
The apparatus is compliant with:
• standards EN55103-1 and EN55103-2 2009, and
• electromagnetic environments E1, E2, E3 and E4.
2. Pre-requisite conditions to achieving compliance with the above standards
<1> Peripheral equipment to be connected to the apparatus and special connecting cables
• The purchaser/user is urged to use only equipment which has been recommended by us as
peripheral equipment to be connected to the apparatus.
• The purchaser/user is urged to use only the connecting cables described below.
<2> For the connecting cables, use shielded cables which suit the intended purpose of the apparatus.
• Video signal connecting cables
Use double-shielded coaxial cables, which are designed for 75-ohm type high-frequency ap-
plications, for SDI (Serial Digital Interface).
Coaxial cables, which are designed for 75-ohm type high-frequency applications, are recom-
mended for analog video signals.
• Audio signal connecting cables
If your apparatus supports AES/EBU serial digital audio signals, use cables designed for AES/EBU.
Use shielded cables, which provide quality performance for high-frequency transmission ap-
plications, for analog audio signals.
• Other connecting cables (IEEE1394, USB)
Use double-shielded cables, which provide quality performance for high-frequency applica-
tions, as connecting cables.
• When connecting to the DVI signal terminal, use a cable with a ferrite core.
• If your apparatus is supplied with ferrite core(s), they must be attached on cable(s) following
instructions in this manual.
3. Performance level
The performance level of the apparatus is equivalent to or better than the performance level
required by these standards.
However, the apparatus may be adversely affected by interference if it is being used in an EMC
environment, such as an area where strong electromagnetic fields are generated (by the presence
of signal transmission towers, cellular phones, etc.). In order to minimize the adverse effects of the
interference on the apparatus in cases like this, it is recommended that the following steps be taken
with the apparatus being affected and with its operating environment:
1. Place the apparatus at a distance from the source of the interference.
2. Change the direction of the apparatus.
3. Change the connection method used for the apparatus.
4. C onnect the apparatus to another power outlet where the power is not shared by any other appliances.
AC adaptor (Battery charger)
TYPE BF
indicates safety information.
7