Panasonic AG-HPX300 Folleto y especificaciones - Página 15

Navegue en línea o descargue pdf Folleto y especificaciones para Videocámara Panasonic AG-HPX300. Panasonic AG-HPX300 21 páginas. P2hd

Imprimir página

Remote Control-Ready

The AG-EC4G Extension Remote Control Unit (to be released in autumn

2009) or AJ-RC10G Remote Control Unit* offer both studio use and direct

connection to the AG-HPX300. This lets you adjust the images and control

the camera operation while viewing the monitor.

*The AJ-RC10G can control only functions supported by the AG-HPX300 Series. It cannot control

unsupported keys or dials.

10P Cable (10m/50m)

Camera Image

AG-HPX300

Remote Control

HD/SD SDI Output Terminals and Down-Converter

The AG-HPX300 Series comes with two output types: a composite video

output and two SDI outputs. In addition to HD-SDI output, the internal

down-converter allows high-quality SD video to be output. The aspect

mode is selectable.

• SDI OUT (HD/SD): Can also output signals with embedded audio. When

the AG-HPX300 is set for HD-SDI output, backup recording operation

can be interlinked with the Rec Start/Stop controls of an HD-SDI input-

equipped Panasonic recorder, such as the AG-HPG20. The AG-HPX300

can also output down-converted SD-SDI from an HD source.

• VIDEO OUT: Outputs SD (composite) signals. HD signals are down-

converted.

VIDEO OUT

SDI OUT

AG-HPX300

USB2.0 Interface

The AG-HPX300 standard USB2.0 connector supports both Host and

Device modes. In Device mode, a P2 card slot can be used as an external

PC device, making it easy to upload data to a nonlinear editing system or

network server. In Host mode an external hard disk drive can be connected

to the slot, making it easy to copy data from the P2 card, write data to the

card, or view thumbnails of stored video clips.

USB 2.0

AG-HPX300

AJ-RC10G

Remote Controller

Monitor

VBS

AG-EC4G

Extension Control Unit

(ECU)

Analog Composite

Monitor

HD-SDI

AG-HPG20

P2HD Portable

Recorder

Upload

(DEVICE)

NLE

File Copy

(HOST)

HDD

IEEE 1394 Interface

The IEEE 1394-compliant DVCPRO (6-pin) output connector lets you input/

output HD/SD compression streams including DVCPRO HD without

decoding.* This means you can connect and use a DVCPRO HD VTR or P2

HD recorder for degradation-free backup recording.

* Output is not possible in 720p native mode (25pN), Interval-rec, and One-shot rec mode.

AVC-Intra is not supported. Text memo, shot mark can not be added in Loop-rec, Interval-rec, or

One-shot rec mode.

DVCPRO HD

IEEE 1394

(AV Stream)

AG-HPX300

TC IN, TC OUT, and GENLOCK IN Terminals

The AG-HPX300 has a built-in SMPTE time code generator/reader. TC IN

and OUT terminals make time code throughput possible. The GENLOCK IN

terminal permits external time-code lock.

Other System Functions and Options

• UniSlot® wireless receiver compatible (dual or single channel compatible)

* UniSlot® is a trademark of Ikegami Tsusinki Co., Ltd.

• XLR audio input: 2-channel mic/line inputs supporting 48V phantom

power supply.

• Multiple battery support, including Anton Bauer or IDX batteries*.

* The V-mount battery plate is required for IDX batteries.

• Equipped with earphone terminal (mini-jack) and speaker.

DVCPRO HD

AG-HPG20

Recorder

P2HD Portable

Recorder

Rear terminal

Side terminal