AquaScape POND FILTER URN series Instrucciones y mantenimiento - Página 2
Navegue en línea o descargue pdf Instrucciones y mantenimiento para Sistemas de filtración de agua AquaScape POND FILTER URN series. AquaScape POND FILTER URN series 2 páginas.
Imprimir página
Instructions
STEP 1
• Unpack the components and rinse the included filtration
media. Then, insert the filter mat and ceramic filtration rings
into the filter (Ex. 1).
STEP 2
• Place the urn in your desired location with the mouth of the
urn positioned over the pond or water feature (Ex. 2).
STEP 3
• Attach the included pipe/ tubing to the barb at the back of
the filter (Ex. 3). Then, attach the other end to a compatible
water pump (not included). If desired, a hose clamp (not
included) can be used to secure the connections.
STEP 4
• Plug in the pump and enjoy (Ex. 4).
General Maintenance
The included filter mat and ceramic filtration rings will need
to be cleaned periodically. You will know when it is time to
clean the media when water starts to pour over the top safety
overflow, bypassing the filtration media. Clean the media by
rinsing in a bucket of clean pond water.
NOTE: Rinsing the filtration media with chlorinated tap water
may kill or damage beneficial bacteria colonizing within the
media. When cleaning filter media make sure to use pond
water in a clean bucket or container, intended for pond-use
only, in order to avoid contamination.
For more information about our company or products, please visit our website at aquascapeinc.com
04/18
or call us at US (866) 877-6637or CAN (866) 766-3426
©2018 Aquascape, Inc. • All Worldwide Rights Reserved
☎
US (866)877-6637 |
☎
CAN (866)766-3426 | aquascapeinc.com
Ex. 1
Ex. 3
Ex. 2
Ex. 4
Diagram