AquaScape Pond Air 4 Instrucciones y mantenimiento - Página 5

Navegue en línea o descargue pdf Instrucciones y mantenimiento para Césped y jardinería AquaScape Pond Air 4. AquaScape Pond Air 4 16 páginas. Pond aerator

Imprimir página
sUggested Pond installation
2. lay out the aeration tubing with pre-installed check valves.
3. Attach the end of aeration tubing with the pre-installed
check valve to the front nozzle on the air pump. The check
valve is designed to prevent water from siphoning back
through the tubing and entering into the compressor. Failure
to install the check valve may result in the compressor
being permanently damaged, voiding the warranty.
4. Attach the Aeration Discs
to the opposite end of
the aeration tubing.
www.aquascapeinc.com |
☎
5. Position the Aeration Discs
in the bottom of the pond.
We recommend separating
the Aeration Discs apart
from each other to
maximize the circulation
throughout the entire pond.
CAN 1-866-766-3426 |
☎
6. Connect the pump to an
outlet that is protected
by a ground fault circuit
interrupter (gFCI).
US 1-866-877-6637
Check valve
or
tip – Small rocks or gravel
can be used to hide
the aeration tubing and
prevent it from floating, or
to secure the Aeration Disc
in the proper position.
5