AquaScape 98525 Instrucciones de instalación paso a paso - Página 4

Navegue en línea o descargue pdf Instrucciones de instalación paso a paso para Equipos de iluminación AquaScape 98525. AquaScape 98525 6 páginas.

Installing a Decorative Spitter

1) The Small AquaBasin

Connect the tubing to the Ultra

™

the AquaBasin

and then place the pump and plumbing inside the AquaBasin

can be run out the notch on the side of the AquaBasin

2) The Small AquaBasin

in each corner on top of the AquaBasin

you the additional option of placing a decorative

piece on one of the corners and running the tubing

inside the basin rather than through the center

plumbing port. Depending what size tubing is being

used, a ½" or ¾" hole saw drill bit will be needed to

drill out the hole(s). (See the drawing on the right.)

3) Next, place the spitter where desired and connect

the tubing to the barb ﬁtting using the supplied hose

clamp from the AquaBasin

#98136, #98138, or #98463 sold separately).

(*Note – It is recommended to adjust the water ﬂow of the pump by adjusting the ball

valve before ﬁnally placing the decorative spitter.) (Fig. 9)

4) Now that everything is in place, you can ﬁnish covering the top with your choice of gravel.

(Fig. 10)

™

is designed with one removable grate for easy pump access.

™

Pump and ball valve using the plumbing supplies from

™

Ultra

Pump Kit (items #98136, #98138, or #98463 sold separately)

™

is designed with a drill point

™

. This gives

™

Ultra

Pump Kit (items

Fig. 9

™

. The cord from the pump

™

Center

Optional

Plumbing Port

4 Drill Points

Fig. 10