AquaScape Signature Series 200 Instrucciones y mantenimiento - Página 7
Navegue en línea o descargue pdf Instrucciones y mantenimiento para Filtro de piscina AquaScape Signature Series 200. AquaScape Signature Series 200 16 páginas. Pond skimmer
También para AquaScape Signature Series 200: Instrucciones y mantenimiento (16 páginas), Instrucciones de instalación y mantenimiento (16 páginas)
Imprimir página
WASH ROCKS AND GRAVEL
• Using a garden hose, wash the rock and gravel down in
order to remove the dust and dirt. Use the pump provided
with the kit attached to a scrap section of kink-free pipe.
The pump can temporarily be placed in the lowest
point of the pond and the dirty water discharged to a
drainage area in the yard.
STEP 6
COMPLETE THE SKIMMER INSTALLATION
• The skimmer has two holes on either side of the unit for
the plumbing to travel to the BioFalls
plumbing hole that is most convenient. The pipe simply
passes through the opening on either side
of the skimmer.
• The pump's electrical cord can be run through either hole
provided in the side of the skimmer
• Insert the barbed multi-hose adapter included with the
pump onto the end of the pipe and tighten down hose
clamp. Thread the end of the pipe onto the rotational ball
fi tting attached to the pump and lower into the skimmer
www.aquascapeinc.com |
1000. Choose the
®
CAN 1-866-766-3426 |
STEP 7
OPTIONAL OVERFLOW INSTALLATION
• Attach and trench a section of kink-free pipe into place (3'
minimum). Create a drainage area at the end of the pipe by
excavating a small pit, roughly 16" in diameter and at least
12" deep. Fill the pit with excess gravel. This will allow
water in an overfl ow situation to fl ow through the pipe and
drain away from the pond. (See Ex. 14)
• A layer of scrap underlayment fabric, soil or sod can be
added to cover the drainage area.
STEP 8
WATER PUMP PLUMBING
• Run your tubing from the water pump in the skimmer to
your desired location or point of entry.
STEP 9
ADD WATER
• Fill up the pond basin with water. The pond should be fi lled
¾" below the top of the front opening of the skimmer (refer
to Ex. 4 on page 5).
Note: We recommend adding Aquascape Pond Detoxifi er to dechlorinate and
properly condition water prior to introducing fi sh to your new pond. See your
Aquascape dealer for water treatment products.
US 1-866-877-6637
Ex. 14
7