Diamond VK38-200 Manual técnico - Página 6

Navegue en línea o descargue pdf Manual técnico para Congelador Diamond VK38-200. Diamond VK38-200 14 páginas.
También para Diamond VK38-200: Manual (20 páginas), Manual de instalación (13 páginas), Manual técnico (14 páginas)

Imprimir página

Keyboard lock:

To lock or unlock the keyboard, press these keys simultaneously for about 5 seconds

(to lock the display reads 'Pof', to unlock the display reads 'Pon').

Display set temperature:

Press this key and the display will show the set temperature. Press the key again to return to

normal reading

Display evaporator temperature:

Press this key continously to show the evaporator temperature, let go to return to normal

reading.

Set new temperature:

Press this key and the display shows the set temperature.

Press this key to increase the set temperature.

Press this key to lower the set temperature.

Press this key to save the new settings. The display will flash with the new value and will

then return to normal reading.

Changing of parameters:

Press this key continuously for 5 seconds to access the list of parameters. The display will

show the number of the parameter and after 2 seconds the value.

Press this key to increase the value.

Press this key to lower the value.

Press this key to save the new settings. The display will flash with the new value and will

then return to normal reading.

See table of parameters from page 51.

Alarm codes:

PF1 Flashing in the display: indicates that the cabinet sensor is defective.

The cabinet will strive to keep the set temperature until it has been repaired.

PF2 Flashing in the display: indicates that the evaporator sensor is defective.

This does not influence the operation of the cabinet, but should be repaired as soon as

possible.