Chuango WD-80 Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Sensores de seguridad Chuango WD-80. Chuango WD-80 16 páginas. Wireless vibration detector

High sensitivity

(Default Setting)

Normal Zone

(Arm zone, default setting)

Please connect the detector with control panel before use:

1. Make sure the control panel is under pairing state (please refer to

the relative user manual).

2. Knock once on the surface of the detector to simulate an alarm (LED

flashes once), when a beep is heard from control panel, it means

the pairing is successful.

Medium Sensitivity

Low sensitivity

24-Hour Zone

Installation

1. Remove the insulating strip; the detector will enter working state.

2. Clean the surface of object to

be installed.

3. Fix the detector on the middle

of the object's surface with

double-sided adhesive tape

and make sure the antenna is

upward.

Note:

Whether a vibration signal will be detected depends on not only the knocking

strength on objects, but also the strength, frequency and duration of the signal.

Power Supply:

DC 3 V (AAA 1.5 V LR03 x 2 PCS)

Static Current:

< 29 uA

Alarm Current:

< 22.2 mA

Transmitting Distance:

< 80 m (in open area)

Radio Frequency:

433 MHz

Housing Material:

ABS plastic

Operation Condition:

Temperature: 0°C ~ +55°C

Relative Humidity: < 80% (non-condensing)

Detector Dimensions (L x W x H):

54 X 14.5 X 107 mm