AQUASONIC AC339 Manual de instalación - Página 7

Navegue en línea o descargue pdf Manual de instalación para Altavoces AQUASONIC AC339. AQUASONIC AC339 10 páginas. Underwater loudspeakers

Imprimir página

AQUASONIC DROP-IN INSTALLATION

This configuration requires some assembly. A tether is recommended to suspend speaker in water.

TST

Float

Passive TST

Jam Nut

TST

Jam Nut

TST

Tether Eyelet

TOOLS NEEDED: Phillips Head Screwdriver, 2-9/16" Open-Ended Wrenches.

ASL

Passive TST

Floating Assembly

ASL

** Quick Connect Kit on Page 7

1. Remove AC339 and acoustic sound lens (ASL) from packaging.

2. Seperate the TST from the float. Using the 9/16" wrenches,

loosen the jam nut to remove the float assembly from the gold

mounting point on the TST. Use one 9/16" wrench to hold the

TST's gold fastener, and with the second 9/16" wrench turn the jam

nut away from the gold mounting point until float and TST are

seperated.

3. Remove one jam nut from the threaded stud on float assembly.

Thread jam nut completely onto stud attached to acoustic

sound lens. You should now have two jam nuts threaded

completely on to the stud connected to the sound lens.

4. Fully thread acoustic sound lens onto TST. Using two wrenches

tighten jam nut against the mounting point. Using one wrench to

hold the TST's gold fastener, while the second tightens the

jam nut against the gold mounting point. Make sure that jam nut

is firmly tightened against the gold mounting point. This assembly

is now ready to have a tether attached and be lowered into water.

IMPORTANT NOTE: DO NOT ASSEMBLE BY USING THE DOME

ITSELF TO TIGHTEN—MAKE SURE TO TIGHTEN THE TSTs BY

USING A 9/16" WRENCH ON THE GOLD HEX MOUNTING POINT

AND TURN THE JAM NUT USING A SECOND 9/16" WRENCH.

7. Attach nylon rope* (not supplied) to tether eyelet.

8. Use wire floats (H) as needed.

9. Connect speaker wires to sound system.

10. Unit is ready to be dropped into water.

11. Adjust volume.

12. Enjoy!

* Recommended option: A tether (nylon rope) is recommeded

to use to raise, lower, and suspend speaker in water—this can

be purchased at your local hardware or pool supply store.

Aquasonic