t Image capture size buttons
These buttons will be displayed only when a JPEG
image is displayed.
: The letters "VGA" will turn green and
images in the main area will be displayed
in VGA size.
: The letters "QVGA" will turn green and
images in the main area will be displayed
in QVGA size.
:
The letters "1 280 x 960" will turn green and
images in the main area will be displayed in
1 280 x 960 (pixels).
Depending on the window size of the web
browser, it may become smaller than 1 280 x
960 pixels.
y Zoom buttons
: The letter "x1" will turn green and images in
the main area will be displayed at x1.
: The letter "x2" will turn green and images in
the main area will be displayed at x2.
: The letter "x4" will turn green and images in
the main area will be displayed at x4.
u Brightness buttons *
: The displayed image will be darker.
: The adjusted brightness will return to the
default brightness.
: Image will be brighter.
2
i AUX buttons *
: The letters "Open" on the button will turn
green and the status of AUX connector will
be open.
: The letters "Close" on the button will turn
green and the status of the AUX connector
will be closed.
o
[SD] button (manual SD recording
2
button) *
This button will be displayed only when "Manual" is
selected for "Save trigger" on the setup menu.
( Setup Instructions)
Click this button to manually record images on the
SD memory card. Refer to page 9 for descriptions of
how to manually record images on the SD memory
card.
6
2
!0
[List] button *
This button will become available only when "On" is
selected for "Save logs" on the setup menu
( Setup Instructions).
When this button is clicked, the log list will be dis-
played and images saved on the SD memory card
can be played.
Refer to page 16 for further information about the log
list and of how to play images on the SD memory
card.
!1 Camera title
The camera title entered for "Camera title" on the
[Basic] tab will be displayed. ( Setup Instructions)
!2
Alarm occurrence indication button *
This button will be displayed and will blink when an
alarm has occurred. When this button is clicked, the
alarm output terminal will be reset and this button
will disappear. ( Setup Instructions)
!3
Full screen button
Images will be displayed on a full screen. To return
to the "Live" page, press the [Esc] key.
!4
One shot button
Click this button to take a picture (a still picture). The
picture will be displayed on a newly opened window.
When right-clicking on the displayed image, the pop-
up menu will be displayed. The displayed image can
be saved on the PC by selecting "Save" from the
pop-up menu.
When "Print" is selected, printer output is enabled.
!5
Mic input button *
Turns on/off the audio reception (hear audio from
the camera on a PC). This button will be displayed
only when "Mic input", "Interactive (full duplex)" or
"Interactive (half duplex)" is selected for "Audio
mode" on the setup menu. ( Setup Instructions)
When this button is clicked, the button will turn into
the
button and audio from the camera will not be
heard.
Audio volume can be adjusted (Low/Middle/High) by
moving the volume cursor
1
2
3
.
Imprimir página