Panasonic WV-NP502 Manual de instalación - Página 28
Navegue en línea o descargue pdf Manual de instalación para Videocámara Panasonic WV-NP502. Panasonic WV-NP502 32 páginas. Ip video cameras
También para Panasonic WV-NP502: Cuadro comparativo (6 páginas), Nota de integración (8 páginas)
Imprimir página
Troubleshooting
Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the
table or a problem is not described below.
Symptom
Power is not turned on.
28
Cause/solution
When using DC power supply
• Is 12 V DC power supply connected to
the power supply terminal?
→ Check whether the connection is
appropriately established.
When using a PoE device for power
supply
• Are the PoE device and the network
connector on the rear of the camera
connected using a LAN cable (4-pair)?
→ Check whether the connection is
appropriately established.
• Depending on the PoE device, the power
supply will stop when the demanded
power exceeds its total power limit for all
PoE ports.
→ Refer to the operating instructions of
the PoE device in use.
Reference
pages
23 - 24