Panasonic WV-SF342 Manual de instalación - Página 26

Navegue en línea o descargue pdf Manual de instalación para Videocámara Panasonic WV-SF342. Panasonic WV-SF342 44 páginas. Ip video cameras
También para Panasonic WV-SF342: Especificaciones (2 páginas), Características y especificaciones (2 páginas), Manual de instalación (48 páginas), Nota de integración (8 páginas)

Important:

• Be sure to use the power cord plug provided with this product.

• Be sure to fully insert the power cord plug into the 12 V DC power supply terminal (accessory).

Otherwise, it may damage the camera or cause malfunction.

• Be sure to use an AC adaptor compliant with the Specifications regarding power source and

power consumption (☞ page 39).

t Run the 12 V DC output cable through the gap of the cable hook.

When using PoE (IEEE802.3af compliant)

Connect a LAN cable (category 5 or better, straight, STP*) between a PoE device (such as a hub)

and the network connector of the camera.

* PAL models only

Important:

• Use all 4 pairs (8 pins) of the LAN cable.

• The maximum cable length is 100 m {328'}.

• Make sure that the PoE device in use is compliant with IEEE802.3af standard.

• When connecting both the 12 V DC power supply and the PoE device for power supply, PoE

will be used for power supply.

• When disconnecting the LAN cable once, reconnect the cable after about 2 seconds. When

the cable is quickly connected, the power may not be supplied from the PoE device.

12 V DC output cable

Cable hook