Panasonic WV-SP509 Manual de instalación - Página 18
Navegue en línea o descargue pdf Manual de instalación para Videocámara Panasonic WV-SP509. Panasonic WV-SP509 40 páginas. Ip video cameras
También para Panasonic WV-SP509: Especificación (2 páginas), Manual de instalación (36 páginas), Nota de integración (8 páginas)
Imprimir página
Lens mounting
Slowly rotate the lens clockwise to mount the lens and connect the lens cable to the ALC lens con-
nector of the camera.
ALC lens connector
Optional dedicated lens
Product name
ALC lens for 1/3 type CCD cameras
2x varifocal (High resolution)
* If a lens for 1/3 type video camera other than the above is mounted and the camera is used at
resolution of 1280 x 720 or higher, the camera cannot achieve full performance of high resolu-
tion. It is recommended to use a dedicated high-resolution lens especially when the illuminance
level of the photographic subject is low and the camera is used with the lens iris open.
How to adjust the focus
z
Before adjustment, reset the back focus position by holding down the auto back focus button
for 5 seconds or more when the power is on. (This operation can also be performed on the
setup menu. Refer to the Operating Instructions (included in the CD-ROM).)
x
Adjust the view angle and focus coarsely by adjusting the zoom and focus of the lens to center
a subject in the screen, and then press the auto back focus button on the side of the camera
(☞ page 16) or perform the auto back focus function from the setup menu.
Refer to the Operating Instructions (included in the CD-ROM) for how to perform the auto back
focus function from the setup menu.
IMPORTANT:
• Press the auto back focus button twice quickly to perform basic adjustments in a short time.
For more accurate adjustments use the detailed adjustments.
• After performing basic adjustments, make sure to press the auto back focus button once to
perform detailed adjustments.
18
Zoom lock knob
CS-mount lens
(option)
Focus ring
Model number
WV-LZA62/2
Protruded portion
from mount face:
ø20 mm {25/32
inches} or less
Protruded portion from flange face:
4.5 mm {5/32 inches} or less
1 3
Pin No.
1
2
3
4
2 4
Dump @
Dump !
Drive !
Drive @