Diamond Antenna SG-M911 Montaje

Navegue en línea o descargue pdf Montaje para Antena Diamond Antenna SG-M911. Diamond Antenna SG-M911 2 páginas. 6m/2m/70cm tri-band mobile antenna

FREQUENCY:

GAIN :

POWER :

ELEMENT PHASING : 6m: 1/4λ, 2m: 1/2λ, 70cm: 2 5/8λ

IMPEDANCE :

VSWR :

LENGTH :

WEIGHT :

MOUNT :

WARRANTY :

Recommended Mounts: K400C, K400S, K412C, K412S, K600M and K600S.

THE SG-M911 REQUIRES PEOPER VEHICLE GROUND. MOUNTING LOCATION WILL AFFECT VSWR.

NOT RECOMMENDED FOR MAGNET MOUNTS.

1. Remove antenna from package and inspect contents to insure it is complete.

2. Choose desired mounting location to insure proper vehicle grounding, maximum strength of mount, and best

performance of antenna.

3. Install antenna on vehicle. Use quality meter to check VSWR. The SG-M911 is pre-tuned and only minor adjustment

may be required for best VSWR. Minor tuning can be achieved by loosening setscrews at fold-over and adjusting

lower element.

4. Tighten setscrews. Recommend using removable Loctite Threadlocker #242 or similar product to insure proper

fastening of setscrews.

Lift upper half of foldover hinge vertically out of its conical socket, avoiding the use of the sockets' edge as a

fulcrum. Position hinge to permit foldover in desired direction. Care should be taken when folding over, not to damage

vehicle or antenna. Do not drive with antenna in folded position.

6m/2m/70cm Tri-Band Mobile Antenna

6m: 52-54 MHz, 2m: 144-148 MHz, 70cm: 440-450 MHz

6m: 2.15 dBi, 2m: 2.15 dBi, 70cm: 5.5 dBi

60 Watts

50 Ohms (nominal)

1.5:1 (nominal)

41"

.3 lbs.

UHF Male

1 year against defects in material or workmanship.

Foldover Hinge Assembly

DIAMOND ANTENNA Products are distributed by RF PARTS COMPANY

435 S. Pacific Street ¥ San Marcos, CA 92078 ¥ (760) 744-0900

www.diamondantenna.net

SG-M911

Specifications

Antenna Assembly