Panasonic = Manual de instrucciones - Página 2

Navegue en línea o descargue pdf Manual de instrucciones para TV Panasonic =. Panasonic = 29 páginas. Color television
También para Panasonic =: Manual de instrucciones (36 páginas), Manual de instalación (5 páginas)

Imprimir página

Safety Information



Read the operating instructions for the unit and all other

components of your car audio system carefully before using

the system. They contain instructions about how to use the

system in a safe and effective manner. Panasonic assumes

no responsibility for any problems resulting from failure to

observe the instructions given in this manual.

This pictograph intends to alert you to the

presence of important operating instructions

and installation instructions. Failure to heed the

Warning

instructions may result in severe injury or death.

Warning

Observe the following warnings when using

this unit.

 The driver should neither watch the display nor

operate the system while driving.

Watching the display or operating the system will distract

the driver from looking ahead of the vehicle and can cause

accidents. Always stop the vehicle in a safe location and use

the parking brake before watching the display or operating

the system.

 Use the proper power supply.

This product is designed for operation with a negative

grounded 12 V DC battery system. Never operate this

product with other battery systems, especially a 24 V DC

battery system.

 Protect the Deck Mechanism.

Do not insert any foreign objects into the slot of this unit.

 Do not disassemble or modify the unit.

Do not disassemble, modify the unit or attempt to repair the

product yourself. If the product needs to be repaired, consult

your dealer or an authorized Panasonic Service Center.

 Do not use the unit when it is out of order.

If the unit is out of order (no power, no sound) or in an

abnormal state (has foreign objects in it, is exposed to

water, is smoking, or smells), turn it off immediately and

consult your dealer.

 The remote control unit should not lie about in the

car.

If the remote control unit lies about, it could fall on the ﬂ oor

while driving, get wedged under the brake pedal, and lead to

a trafﬁ c accident.

 Refer fuse replacement to qualiﬁ ed service

personnel.

When the fuse blows out, eliminate the cause and have it

replaced with the fuse prescribed for this unit by a qualiﬁ ed

service engineer. Incorrect replacement of the fuse may lead

to smoke, ﬁ re, and damage to the product.

CQ-C3305W



This manual uses pictographs to show you how to use the

product safely and to alert you to potential dangers resulting

from improper connections and operations. The meanings of

the pictographs are explained below. It is important that you

fully understand the meanings of the pictographs in order to

use this manual and the system properly.

This pictograph intends to alert you to the presence

of important operating instructions and installation

instructions. Failure to heed the instructions may

Caution

result in injury or material damage.

Observe the following warnings when

installing.

 Disconnect the lead from the negative (–) battery

terminal before installation.

Wiring and installation with the negative (–) battery terminal

connected may cause electrical shock and injury due to a

short circuit.

Some cars equipped with the electrical safety system have

speciﬁ c procedures of battery terminal disconnection.

FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE

UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY

SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND

PERSONAL INJURY OR DEATH.

 Never use safety-related components for

installation, grounding, and other such functions.

Do not use safety-related vehicle components (fuel tank,

brake, suspension, steering wheel, pedals, airbag, etc.) for

wiring or ﬁ xing the product or its accessories.

 Installing the product on the air bag cover or in a

location where it interferes with airbag operation is

prohibited.

 Check for piping, gasoline tank, electric wiring, and

other items before installing the product.

If you need to open a hole in the vehicle chassis to attach

or wire the product, ﬁ rst check where the wire harness,

gasoline tank, and electric wiring are located. Then open the

hole from outside if possible.

 Never install the product in a location where it

interferes with your ﬁ eld of vision.

 Never have the power cord branched to supply

other equipment with power.

 After installation and wiring, you should check the

normal operation of other electrical equipment.

The continuation of their using in abnormal conditions may

cause ﬁ re, electrical shock or a trafﬁ c accident.

 In the case of installation to an airbag-equipping

car, conﬁ rm warnings and cautions of the vehicle

manufacturer before installation.

 Make sure the leads do not interfere with driving or

getting in and out of the vehicle.

 Insulate all exposed wires to prevent short

circuiting.

Caution

Observe the following cautions when using this

unit.

 Keep the sound volume at an appropriate level.

Keep the volume level low enough to be aware of road and

trafﬁ c conditions while driving.

 This unit is designed for use exclusively in automobiles.

 Do not operate the unit for a prolonged period with

the engine turned off.

Operating the audio system for a long period of time with the

engine turned off will drain the battery.

 Do not expose the unit to direct sunlight or

excessive heat.

Otherwise these will raise the interior temperature of the unit,

and it may lead to smoke, ﬁ re, or other damage to the unit.

 Do not use the product where it is exposed to water,

moisture, or dust.

Exposure of the unit to water, moisture, or dust may lead to

smoke, ﬁ re, or other damage to the unit. Make especially sure

that the unit does not get wet in car washes or on rainy days.

 Set the volume level to low enough before the AUX

connection is completed.

Failure to observe this, the loud noise may come out and

damage your speakers and your hearing. Direct connection

of the speaker/headphone output of an external device

without any attenuator may distort sound or damage the

connected external device.

Observe the following cautions when installing.

 Refer wiring and installation to qualiﬁ ed service personnel.

Installation of this unit requires special skills and experience.

For maximum safety, have it installed by your dealer.

Panasonic is not liable for any problems resulting from your

own installation of the unit.

 Follow the instructions to install and wire the product.

Not following the instructions to properly install and wire the

product could cause an accident or ﬁ re.

 Take care not to damage the leads.

When wiring, take care not to damage the leads. Prevent

them from getting caught in the vehicle chassis, screws, and

moving parts such as seat rails. Do not scratch, pull, bend

or twist the leads. Do not run them near heat sources or

place heavy objects on them. If leads must be run over sharp

metal edges, protect the leads by winding them with vinyl

tape or similar protection.

Caution

THIS PRODUCT IS A CLASS I LASER PRODUCT.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE

OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

 Use the designated parts and tools for installation.

Use the supplied or designated parts and appropriate tools to

install the product. The use of parts other than those supplied

or designated may result in internal damage to the unit. Faulty

installation may lead to an accident, a malfunction or ﬁ re.

 Do not block the air vent or the cooling plate of the unit.

Blocking these parts will cause the interior of the unit to

overheat and will result in ﬁ re or other damage.

 Do not install the product where it is exposed to

strong vibrations or is unstable.

Avoid slanted or strongly curved surfaces for installation.

If the installation is not stable, the unit may fall down while

driving and this can lead to an accident or injury.

 Installation Angle

The product should be installed in a horizontal position with

the front end up at a convenient angle, but not more than 30˚.

The user should bear in mind that in some areas there may

be restrictions on how and where this unit must be installed.

Consult your dealer for further details.

 Wear gloves for safety. Make sure that wiring is

completed before installation.

 To prevent damage to the unit, do not connect the

power connector until the whole wiring is completed.

 Do not connect more than one speaker to one set of

speaker leads. (except for connecting to a tweeter)

CQ-C3305W