Panasonic CT-20S12S Manual de instrucciones - Página 3
Navegue en línea o descargue pdf Manual de instrucciones para TV Panasonic CT-20S12S. Panasonic CT-20S12S 28 páginas.
Imprimir página
14. If an outside antenna
is connected
to the television
equipment,
be sure the antenna
system
is grounded
so as to provide
some protection
against voltage
surges and built up static charges.
In the U.S. Section 810 of the National
Electrical
Code
and in Canada
Part 1 of the Canadian
Electrical
Code provides
informatior
,with respect to proper grounding
of the mast
and suppo_ling
structure,
grounding
of the lead-in
wire to an antenna
discharge
unit, size of grounding
conductors,
location of antenna-discharge
unit, connection
to grounding
electrodes,
and requirements
for the grounding
electrode.
See Figure.
15. For added protection
for this television
receiver
during a lightning storm, or when it is left unattended
and unused for long
periods of time, unplug it from the wall outlet and disconnect
the antenna.
This will prevent damage
to the receiver
due to
lightning
and power-line
surges.
16. An outside
antenna
system
should
not be located in the vicinity
of overhead
power lines or other electric
light or power
circuits,
or where it can fall into such power lines or circuits.
When installing
an outside
antenna
system
extreme
care
should
be taken to keep from touching
such power lines or circuits
as contact
with them might be fatal.
17. Unplug this television
receiver
from the wall outlet, and refer servicing
to qualified
service personnel
under the following
conditions:
a.
When the power cord or plug is damaged
or frayed.
b.
If liquid has been spilled into the television
receiver.
c.
If the television
receiver
has been exposed
to rain or water.
d.
If the television
receiver
does not operate
normally
by following
the operating
instructions.
Adjust only those controls
that are covered
by the operating
instructions
as improper
adjustment
of other control.'; may result in damage
and will
often require extensive
work by a qualified
technician
to restore the television
receiver
to normal operation.
e.
If the television
receiver
has been dropped
or the cabinet
has been damaged.
f.
When the television
receiver
exhibits
a distinct
change
in performance
- this indicates
a need for servioe.
18. Do not attempt
to service
this television
receiver
yourself
as opening
or removing
covers
may expose you to dangerous
voltage or other hazards.
Refer all servicing
to qualified
service
personnel.
19. When
replacement
parts are required,
be sure the service
technician
has used replacement
parts specified
by the
manufacturer
that have the same characteristics
as the original part. Unauthorized
substitutions
may result in fire, electric
shock, or other hazards.
20. Upon completion
of any service
or repairs
to this television
receiver,
ask the service
technic
an to perform
routine
safety
checks to determine
that the television
is in safe operating
condition.
21. WARNING::
To prevent
fire or shock
hazard,
do not expose
this appliance
to rain or moisture.
22. CAUTION:
TO PREVENT
ELECTRIC
SHOCK
DO NOT USE THIS (POLARIZED)
PLUG VVITH AN EXTENSION
CORD,
RECEPTACLE
OR OTHER
OUTLET
UNLESS
THE
BLADES
CAN
BE FULLY
INSER-[ED
TO PREVENT
BLADE
EXPOSURE.
NOTE: This equipment
is designed
to operate
in the U.S.A.,
Canada and other countries
where the broadcasting
system
and
AC house current
is exactly the same
as in the U.S.A.
and Canada.
Important
Information
Regarding
Use of Video
Games,
Computers,
Teletext
or Other
Fixed
Image
Displays.
The extended
use of fixed image
program
material
can cause
a permanent
"shadow
image"
on the picture
tube. This
background
image is viewable
on normal programs
in the form of a stationary
fixed image. This type of irreversible
picture tube
deterioration
can be limited
by observing
the following
steps:
A.
Reduce
the brightness/contrast
setting
to a minimum
viewing
level.
B.
Do not display the fixed image for extended
periods
of time.
C.
Turn the power off when not in actual use.
NOTE:
The marking
or retained
image on the picture tube resulting
from fixed image use is nol an operating
defect and as
such is not covered
by Warranty.
This product
is not designed
to display fixed image patlerns
for extended
periods of
time.
Power
Source:
Channel
Capability:
Video Input Jack:
Audio Input Jacks:
To Audio AMP Jacks:
Stereo Sound
Closed Caption Display
Specifications
120V 60Hz, AC
181 channels
(See chart)
VHF 2-13,
UHF 14-69,
Cable 125 channels
lV p-p, 75 ohm, phono jack type
High impedance-
10K ohm,
500mV
rms
0-4.0V
rms 10K ohm
Specifications
are subject
to change
without
notice
or obligation.
Channel
Capability
Chart
BAND
US_CAN
VHF
UHF
CABLE
(Mid-Band)
CABLE
(Super
Band'p
CABLE
(Hyper Band:_,
CABLE
(Ultra Band)
12
56
15
14
28
56
TOTAl.. CHANNELS
181
-3-