AquaStar StarzTruck Manual de instalación - Página 4

Navegue en línea o descargue pdf Manual de instalación para Aspirador de piscinas AquaStar StarzTruck. AquaStar StarzTruck 20 páginas. Automatic suction pool cleaner

Imprimir página

step 1: connectinG and submerGinG the hoses and cleaner

There are nine connector hoses and one leader hose with a grey hose cuff. The hose cuff connects to the top

of the StarzTruck automatic pool cleaner (see Fig. 1).

Connect the StarzTruck automatic pool cleaner hose sections together by pushing and twisting the tapered

male connector end of each hose firmly into the open female end of the adjacent hose section (see Fig. 2).

Depending on the size and shape of your pool, all hose sections might not be used. The hose should reach

from the skimmer or safety vacuum lock wall fitting (AquaStar p/n VLK15Txx) to the furthest point in the

pool plus one extra hose section. If the hose is not long enough, it will be necessary to purchase additional hose

sections from your pool dealer. After the correct hose length has been assembled, fill the hose completely with

water by lowering the attached StarzTruck automatic pool cleaner and then vertically pushing the hose down,

allowing all the air to escape. If optional leaf canister (AquaStar p/n HWN152) is purchased, install between

first and second hose sections (see Fig. 3).

Fig. 2

Fig. 1

First hose section

Skimmer

To StarzTruck

Second hose section

(showing leaf canister)

Fig. 3