3branch KURVE COLLECTION Instrucciones de montaje - Página 3
Navegue en línea o descargue pdf Instrucciones de montaje para Mobiliario interior 3branch KURVE COLLECTION. 3branch KURVE COLLECTION 5 páginas. Round computer table w/cylinder base & top dividers
Imprimir página
STEP 1
LAY CLEAN COVER ON FLOOR TO PROTECT FLOOR & TABLE PARTS.
STEP 2
REMOVE ALL PACKING MATERIAL FROM TABLE PARTS.
*CAUTION: TWO PEOPLE REQ'D FOR TABLE ASSEMBLY TO AVOID
DAMAGE TO TABLE PARTS & PERSONAL INJURY!
STEP 4
FLIP BASE CYLINDER UPRIGHT ON COVER WITH LEVELERS
TURNED DOWN.
MOUNT SUB-TOP MOUNTING PLATES TO TOP OF CYLINDER
WITH #12 X 3/4" FLAT HEAD PHILLIPS SCREWS.
*NOTE: PILOT HOLES FOR MOUNTING PLATE SCREWS ARE
PRE-DRILLED INTO THE TOP PANEL OF THE BASE CYLINDER.
KURVE COLLECTION
3branch
product design solutions
FLOOR
COVER
STEP 3
LAY BASE CYLINDER ON COVER WITH LARGE OPENING TURNED DOWN.
*THREADED INSERTS RECESSED INTO BOTTOM PANEL OF BASE CYLINDER
THREAD LEVELERS INTO THREADED INSERTS LOCATED IN BOTTOM OF
CYLINDER.
#10 X 3/4" FHP
SCREWS
MOUNTING PLATES
STEP 5
BASE CYLINDER.
REMOVE BASE CYLINDER FROM FLOOR COVER.
DESCRIPTION:
P 847.291.3900
F 847.291.3901
www.3branch.com
DATE:
07.08.21
FOR LEVELERS WILL BE VISIBLE.
VERIFY THAT SUB-TOP MOUNTING PLATES ARE SECURED TO TOP OF
ROUND COMPUTER TABLE
W/CYLINDER BASE & TOP DIVIDERS
ASSEMBLY INSTRUCTIONS
DRAWING #
KU-CT-60-26-CYB-ATD-ASSEMBLY-01
LEVELERS
SMALL HOLE
BASE CYLINDER
REV #
0
SHEET
3 OF 5