DIAMOND DRYERS DIAMOND PLUS GWHD22 Manual de instalación - Página 3
Navegue en línea o descargue pdf Manual de instalación para Secadora DIAMOND DRYERS DIAMOND PLUS GWHD22. DIAMOND DRYERS DIAMOND PLUS GWHD22 8 páginas.
Imprimir página
EN
EN
UNPACKING
1. Remove all packing material. Recycling is recommended.
2. Carefully remove the hand dryer from the shipping carton, using care not to drop the appliance.
3.Inspect carefully for any damage that may have occurred during transit. Check for any loose, missing or
damaged parts. If the hand dryer is damaged, promptly inform the shipper or dealer where you purchased it.
Standard items with the hand dryer are shown in Fig.1 together with tools need by the installer.
1
INSTALLATION
CAUTION
• Make sure power supply breaker is switched off.
•
All electrical installation and repair work should be carried out by a qualified electrician or local service
Engineer in accordance with current local codes or regulations.
Check that the electrical supply corresponds to that shown on the rating plate. If the unit is connected to
•
any electrical supply other than stated on the rating plate of the unit, permanent damage or unsafe
operation of the unit may result.
•
The unit must be mounted on a flat vertical wall capable of supporting the full weight of the unit.
1. Remove the Fornt cover
1.1 Place the main cover on a cloth to avoid marking its surface.
1.2 Remove the (2) security screws from the main body, using the service tool provided (fig 2).
Store safely.
1.3 Lift the front cover off the main body (fig 3).
2
4
Installation
Unit
template
Service Tool
Wall mounting
& Spare Screw
anchors with screws
3
Flat cable clamp
& Screw
-in case without
built in power cable