Aquatec SWP-4000 Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Bomba de agua Aquatec SWP-4000. Aquatec SWP-4000 12 páginas. Swp series solar electric submersible pump d.c. powered

Imprimir página
The Aquatec SWP-4000 submersible pump that you have purchased is manufactured from quality components in our
Irvine California manufacturing facility. All of the materials of construction are potable water safe. The pump is
designed to operate on any 12-30 vdc power source, including a 72 cell series array, a 60 or 70 cell module, or a 12 or 24
vdc battery bank. (see table in performance section of this booklet).
Installation of the product is simple and does not require any special tools. The instructions included in this booklet will
ensure ease of installation and maintenance.
The submersible pump is ideal for remote off the grid locations for home and livestock water needs. The Aquatec SWP-
4000 is an electric positive displacement diaphragm pump. Internal over pressure protection is included in the design of
the pump to protect all components in the installation. The maximum pump diameter is 3.75 inches, designed to fit into
a standard 4 inch well casing.
Power supply: For nominal performance, the pump requires 24 vdc /4.5 amps ( 108 watts). The voltage range of
operation is 12 volts min. to 30 volts max. The suggested solar panel/array for best performance would be 180 watts or
larger. A larger wattage solar panel/array would best support the pump performance on a partial sunny day. The solar
panel(s) should be located as close as possible to the pump, in an area that ideally receives direct sunshine from 10am to
3pm. See chart below for performance:
Aquatec SWP-4000 Submersible Pump Performance
Pressure
FT. HEAD
PSI
20
9
40
17
60
26
80
35
100
43
120
52
140
61
160
69
180
78
200
87
230
100
AQUATEC IMI-160, REV C, ECO# 6511, 3/16/15
SUBMERSIBLE PUMP PRODUCT INFORMATION
COMPONENTS NEEDED FOR INSTALLATION
Flow @ 12 Vdc
GPM
LPM
AMPS
0.62
2.35
1.3
0.60
2.27
1.6
0.58
2.20
1.8
0.57
2.15
2.0
0.56
2.12
2.3
0.53
2.00
2.5
0.52
1.97
2.6
0.51
1.93
2.8
0.49
1.85
3.1
0.48
1.82
3.3
0.43
1.63
3.5
Flow @ 24 Vdc
GPM
LPM
AMPS
1.35
5.11
1.3
1.32
5.00
1.6
1.28
4.84
1.8
1.25
4.73
2.0
1.22
4.62
2.3
1.20
4.54
2.5
1.15
4.35
2.6
1.12
4.24
2.8
1.08
4.09
3.1
1.06
4.01
3.3
1.00
3.79
3.5
Flow @ 30 Vdc
GPM
LPM
AMPS
1.70
6.44
1.40
1.65
6.25
1.70
1.60
6.06
1.90
1.55
5.87
2.10
1.50
5.68
2.40
1.48
5.60
2.60
1.42
5.37
2.80
1.40
5.30
3.00
1.35
5.11
3.20
1.30
4.92
3.40
1.25
4.73
3.70
PAGE 3 OF 12