Panasonic AWHE100N - HD INTEGRATED CAMERA Manual de instrucciones de instalación - Página 22
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Cámara digital Panasonic AWHE100N - HD INTEGRATED CAMERA. Panasonic AWHE100N - HD INTEGRATED CAMERA 42 páginas. Hd, integrated
Imprimir página
Installation
This section describes the procedure for a hanging installation, but the same steps apply for a desktop installation.
First, mount the installation surface bracket (accessory) on the installation surface.
Next, attach the drop-prevention wire to the installation surface bracket, and mount the unit onto the installation surface bracket
Mounting the installation surface bracket on the installation surface
The use of anchor bolts is required for the installation.
1
Drive the anchor bolts (M8 bolt 4) into the concrete ceiling.
2
Mount the installation surface base.
Provide the installation surface base that is appropriate for the installation location.
Use the installation surface base that is strong enough to bear a load of 13.3 lbs (60 kg).
Be sure to mount the installation surface base securely using nuts and flat washers.
3
Open holes for mounting the installation surface bracket (supplied) to the ceiling board
(refer to the installation surface bracket diagrams).
4
Attach the installation surface bracket to the installation surface base through the ceiling
board.
When preparing mounting screws (M6 screw 5), bear in mind the thickness of the ceiling board and installation
surface base to ensure that the screws will be long enough.
Provide spring washers, flat washers, and nuts to attach the installation surface bracket securely.
Installation surface base
Spring washer
Mounting screw (M6 screw 5)
Mounting screw (M6 screw 5)
Nut
Flat washer
Flat washer
Concrete ceiling
Anchor bolt (M8 bolt 4)
Nut
Flat washer
Nut
Installation
Ceiling board
surface
bracket
Installation surface bracket
Anchor bolt (M8 bolt 4)
Nut
Flat washer
Nut
Installation surface base
Ceiling board