Panasonic BMET500 - CAMERA HEAD UNIT Manual de instrucciones - Página 13

Navegue en línea o descargue pdf Manual de instrucciones para Cámara digital Panasonic BMET500 - CAMERA HEAD UNIT. Panasonic BMET500 - CAMERA HEAD UNIT 24 páginas. Iris camera

Imprimir página

4. Attach the unit to the mounting bracket.

You need to make a hole of approx. ø 30 mm on the wall to pass the cables out of the rear side.

(1) Attach the mounting

(2) Remove the

numeric keyboard.

5. Connect the coaxial cable to the unit.

The unit is connected to the control unit (Camera 1 - 3).

Coaxial cable

To CAMERA 1 - 3 of the control unit

6. When you use the built-in CCTV camera, connect the

supplied video output cable to VIDEO OUT. Then, con-

nect the supplied video output cable and the video

input cable of a connected device (for example, a mon-

itor or DVR).

Connect them.

To a monitor or digital disk recorder

bracket to the wall.

Screw nut (M5)

Pass the cable

through this hole.

Coaxial cable and

DC power cable *

(from the control unit)

(3) Remove the shipping lock.

(4) Attach the unit to the mounting bracket.

Secure the unit and bracket with the screw nut,

using an 8 mm {0.03 in.} socket driver.

(5) Connect the cables to the unit.

(6) Attach the numeric keyboard.

*Refer to the control unit's operating instructions

for the specifications.

7. Connect the DC power cable to the unit.

If you use power supply from the control unit to the unit,

connect the DC power cable to 0 V and +32 V ports.

If you use 24 V DC power supply from an external

power supply device, connect the power cable to 0 V

and +24 V ports.

0 V

+24 V

+32 V

Caution: Take DC 24 V power supply from a third-party

external power supply device that complies with the

safety standard. (Refer to p.21.)

8. Attach the numeric keyboard.

Connect the control cable which has been connected

to the numeric keyboard. Then, attach the keyboard

with the tamperproof screws.

Caution: Insert the cable into the unit so as to avoid

pressure from the keyboard.

Provide access for

cables to be routed

through the wall.

Pass the cable

through this hole.

To the control unit