Panasonic DMC-FH10P Manual de servicio - Página 30

Navegue en línea o descargue pdf Manual de servicio para Cámara digital Panasonic DMC-FH10P. Panasonic DMC-FH10P 38 páginas.
También para Panasonic DMC-FH10P: Manual del usuario (2 páginas)

Imprimir página

9.3.

Details of Electrical Adjustment

9.3.1.

How to execute the Electrical Adjustment

It is not necessary to connect the camera to a PC to perform adjustments.

"Flag reset operation" and "Initial setting operation" are required when carrying out the alignment, follow the procedure below.

9.3.1.1.

Startup Electrical Adjustment mode

1. Release the initial settings.

2. Insert a recordable memory card (32MB or more).

(Without a momery card, the automatic adjustment can

not executed.)

3. Procedure to set the camera into adjustment mode:

a. Turn the Power on.

b. Press the [ MODE ] button, and select the [ NORMAL

PICTURE ] mode by Cursor button, then press the

[ MENU/SET ] button.

c. Turn the Power off.

d. Turn the Power on pressing [ MENU/SET ] and

[ MOTION PICTURE ] simultaneously.

LCD monitor displays "SERVICE MODE".(Refer to

Fig. 3-1)

9.3.1.2.

Status Adjustment Flag Setting

Reset (Not yet adjusted) the status flag condition.

1. After pressing the "[ W ] side of Zoom button", the LCD

monitor displays the Flag status screen (Refer to Fig.3-2)

2. Select item by pressing the Cursor buttons. (Gray cursor

is moved accordingly.)

3. Press the [ Delete/Cancel ] button.

NOTE:

The selected item's flag has been changed from

"F (green)" to "0 (yellow)".

*Flag conditions:

F (green)

means that the alignment has been completed and the

status flag condition is set. In this case, the flag condition

should be reset, if you try to carry out the automatic align-

ment.

0 (yellow)

means that the alignment has been not "completed" and

the status flag condition is "reset". In this case, automatic

alignment is available.

• In case of setting the status flag into set condition again without completion of the alignment, the status flag should be SET by

using PC, or UNDO by using ROM BACKUP function.

Fig.3-1

Fig.3-2