Panasonic DMC-FS42PR Manual de servicio - Página 4

Navegue en línea o descargue pdf Manual de servicio para Cámara digital Panasonic DMC-FS42PR. Panasonic DMC-FS42PR 14 páginas.

2 INITIAL SETTINGS:

After replacing the MAIN PCB, be sure to perform the initial settings after achieving the adjustment by ordering the following

procedure in accordance with model suffix of the unit.

1. IMPORTANT NOTICE:

Before proceeding Initial settings, be sure to read the following CAUTIONS.

2. PROCEDURES:

• Precautions: Read the above "CAUTION 1" and "CAUTION 2", carefully.

• Preparation:

1. Attach the Battery or AC Adaptor with a DC coupler to the unit.

2. Set the recording mode to the [NORMAL PICTURE] mode.

(Press the [MODE] button and select the [NORMAL PICTURE] by pressing the "[ UP ] and [DOWN] of Cursor buttons",

then press the [MENU/SET] button.)

NOTE:

If the unit is other than [NORMAL PICTURE] mode, it does not display the initial settings menu.

• Step 1. The temporary cancellation of "INITIAL SETTINGS":

Set the [REC]/[PLAYBACK] selector switch to "[ REC ] (Camera mark)".

While keep pressing "[ UP ] of Cursor button" and [ DISPLAY ] button simultaneously, turn the Power on.

• Step 2. The cancellation of "INITIAL SETTINGS":

Set the [REC]/[PLAYBACK] selector switch to "[ PLAYBACK ]".

Press "[ UP ] of Cursor button" and [ DISPLAY ] button simultaneously, then turn the Power off.

• Step 3. Turn the Power on:

Set the [REC]/[PLAYBACK] selector switch to "[ REC ] (Camera mark)", and then turn the Power on.

• Step 4. Display the INITIAL SETTING:

NOTE:

If the unit is other than [NORMAL PICTURE] mode, it does not display the initial settings menu.

While keep pressing [ MENU/SET ] and "[ RIGHT ] of Cursor buttons" simultaneously, turn the Power off.

The "INITIAL SETTINGS" menu is displayed.

There are two kinds of "INITIAL SETTINGS" menu form as follows: