HP 1810-48G Quickspecs - Página 23

Navegue en línea o descargue pdf Quickspecs para Interruptor HP 1810-48G. HP 1810-48G 25 páginas. Smart-managed, fixed-configuration gigabit and fast ethernet layer 2 switches
También para HP 1810-48G: Especificaciones (32 páginas), Quickspecs (32 páginas), Ficha de datos (11 páginas), Manual de configuración rápida (5 páginas)

Imprimir página

QuickSpecs

Accessory Product Details

HP X111 100M SFP LC FX

Transceiver (J9054C)

Transceiver

HP X111 100M SFP LC FX

Transceiver: An SFP format

100-megabit transceiver

with LC connectors using

FX technology.

HP X121 1G SFP LC SX

Transceiver (J4858C)

Transceiver

A small form-factor

pluggable (SFP) Gigabit SX

transceiver that provides a

full-duplex Gigabit solution

up to 550 m on multimode

fiber.

Ports

Physical characteristics

Environment

Cabling

Notes

Services

Ports

Physical characteristics

Environment

Electrical characteristics

Cabling

DA - 13447

Worldwide — Version 9 — October 28, 2011

1 LC 100BASE-FX port (IEEE 802.3u Type 100BASE-FX); Duplex: half or full

Dimensions: 2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x 1.22 cm)

Weight: 0.06 lb. (0.03 kg)

Operating temperature: 32°F to 158°F (0°C to 70°C)

Operating relative humidity: 5% to 95%

Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Nonoperating/Storage relative humidity: 5% to 85%

Altitude: up to 10,000 ft. (3 km)

Cable type:

62.5/125 ìm or 50/125 ìm (core/cladding) diameter, graded-index, low

metal content, multimode fiber optic, complying with ITU-T G.651 and

ISO/IEC 793-2 Type A1b or A1a, respectively; Maximum distance:

• 2 km (full duplex) or 412 m (half duplex)

Transmitter wavelength: 1310nm

Power consumption is 1.1 watt maximum.

For supported platforms and minimum software requirements to support this

product, see the document titled "Support for the J9054B 100-FX SFP-LC

Transceiver" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

Refer to the HP website at

www.hp.com/networking/services

service-level descriptions and product numbers. For details about services

and response times in your area, please contact your local HP sales office.

1 LC 1000BASE-SX port; Duplex: full only

Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)

Weight: 0.04 lb. (0.02 kg)

Transceiver form factor: SFP

Operating temperature: 32°F to 158°F (0°C to 70°C)

Operating relative humidity: 5% to 85%, noncondensing

Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)

Altitude: up to 10,000 ft. (3 km)

Power consumption typical: 0.4 W

Power consumption maximum: 0.7 W

Type:

62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index,

low metal content, multimode fiber optic, complying with ITU-T G.651

and ISO/IEC 793-2 Type A1b or A1a, respectively;

Maximum distance:

2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth

2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth

2-500 m (50 µm core diameter, 400 MHz*km bandwidth)

2-550 m (50 µm core diameter, 500 MHz*km bandwidth)

Cable length: 2-550m

Fiber type: Multi Mode

HP 1810 Switch Series

for details on the

Page 23