HP 316095-B21 - StorageWorks Edge Switch 2/24 Nota de publicación - Página 31

Navegue en línea o descargue pdf Nota de publicación para Interruptor HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 32 páginas. Edge switch release notes
También para HP 316095-B21 - StorageWorks Edge Switch 2/24: Manual de actualización (9 páginas), Manual (41 páginas), Manual (40 páginas), Nota de publicación (27 páginas), Manual (26 páginas), Nota de publicación (27 páginas), Nota de publicación (25 páginas), Manual de instrucciones de instalación (24 páginas), Nota de publicación (23 páginas), Nota de publicación (23 páginas), Nota de publicación (22 páginas), Nota de publicación (23 páginas), Nota de publicación (19 páginas), Nota de publicación (19 páginas), Nota de publicación (18 páginas), Manual de instrucciones (17 páginas), Nota de publicación (17 páginas), Instrucciones de actualización (16 páginas), Manual de instrucciones (16 páginas), Manual de instrucciones de instalación (16 páginas), Nota de publicación (16 páginas), Nota de publicación (17 páginas), Nota de publicación (17 páginas), Nota de publicación (11 páginas)

Workaround

When a switch has been added to HAFM for management, or ﬁrmware has been

upgraded, observe the switch being shown as discovered by HAFM. Check the event

log of the switch to ensure there were no faults that occurred during the short time when

HAFM was in the process of discovering the switch.

New sound ﬁles are not added to Event Manager immediately

New sound ﬁles do not display in the pull down menu of the Event Manager. They

cannot be selected for inclusion in a rule. In order for the new sound ﬁles to be

available, HAFM services must be stopped and restarted, or the HAFM appliance must

be rebooted. This is not disruptive to managed switches, but monitoring and logging

functions are interrupted while the appliance is rebooting.

HP-UX parameters may need to be changed before you run the HAFM client

The following two HP-UX 11.0 kernel parameters are set too low for most

Java applications. Usually you will see this problem as a java.lang.OutOf

MemoryError:

the issue, edit the following parameter limits:

•

max_thread_proc—The maximum number of threads allowed in each

process. The minimum value (and default) is 64, which is often too low for

most Java applications. Set the value of the max_thread_proc higher than

the expected maximum number of simultaneously active threads. The maximum

value is the value of nkthread.

•

nkthread—The total number of kernel threads available in the system. This

parameter is similar to the nproc tunable except that it deﬁnes the limit for

the total number of kernel threads able to run simultaneously in the system.

The value must be greater than nproc. The default is approximately twice that

of nproc. The maximum is 30000. The suggested value of nkthread is

2*max_thread_proc. If you have many Java processes running and each

running process uses many threads, you should increase this value.

Client HAFM Login dialog box is not displayed after logging out

In some cases, when the client has logged out, the Log In dialog box is not displayed.

If you get inconsistent behavior or an error message, restart the client. SAN data is

not affected when you restart the client.

HAFM appliance may shut down following a ﬁrmware download

The HAFM appliance may shut down following a ﬁrmware download. If this occurs,

you have to restart the HAFM appliance to recover. This is an issue with Java Virtual

Machine 1.3.1_07, which is used in the application. This is only an issue when running

ﬁrmware 06.00.01 or earlier.

unable to create new native thread error. To resolve

HA-Fabric Manager release notes