HP 316095-B21 - StorageWorks Edge Switch 2/24 Nota de publicación - Página 9

Navegue en línea o descargue pdf Nota de publicación para Interruptor HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 27 páginas. Edge switch release notes
También para HP 316095-B21 - StorageWorks Edge Switch 2/24: Manual de actualización (9 páginas), Manual (41 páginas), Manual (40 páginas), Nota de publicación (32 páginas), Manual (26 páginas), Nota de publicación (27 páginas), Nota de publicación (25 páginas), Manual de instrucciones de instalación (24 páginas), Nota de publicación (23 páginas), Nota de publicación (23 páginas), Nota de publicación (22 páginas), Nota de publicación (23 páginas), Nota de publicación (19 páginas), Nota de publicación (19 páginas), Nota de publicación (18 páginas), Manual de instrucciones (17 páginas), Nota de publicación (17 páginas), Instrucciones de actualización (16 páginas), Manual de instrucciones (16 páginas), Manual de instrucciones de instalación (16 páginas), Nota de publicación (16 páginas), Nota de publicación (17 páginas), Nota de publicación (17 páginas), Nota de publicación (11 páginas)

Imprimir página
HP 316095-B21 - StorageWorks Edge Switch 2/24 Nota de publicación
Open Trunking with FMS
Open Trunking Load Balancing is now qualified in FICON environments where FICON
flows are rerouted, without encountering out-of-order frames.
Safe Zoning mode
When this mode is enabled through the CLI or HAFM Basic, zone merges are prohibited
if zone sets from different fabrics do not match, and the default zone (available in
Homogeneous Fabric mode only) cannot be activated. This prevents fabric merge
problems when zones are removed accidentally or when new unzoned devices are
added to the fabric when the default zone is enabled.
The following CLI and HAFM Basic enhancements support this mode:
•
CLI—New config.switch.safeZoning command
•
HAFM Basic—A Safe Zoning Mode check box on the Security menu
Security enhancements
The following enhancements have been made to Security features:
•
Firmware 08.01.00 supports SSL connection for HTTP sessions managing
switches with HAFM Basic, as well as HAFM management sessions. This ensures
that all data transmitted between the switch and these management interfaces
is secure and encrypted. SSL complements the SSH support added to firmware
07.xx.xx for CLI management.
•
Support for standard syslog logging functions. You can configure a central
logging service for all log events. Each log can be configured separately for
distribution to the syslog.
•
The SNMP interface can be configured to operate in version 3 mode, and
support for authentication is provided. SNMPv3 provides additional security for
you to authenticate any management sessions on your M-Series Fibre Channel
switches. Consider the following:
• The authentication/privacy password (key) configured for an SNMPv3 user
on a switch is not localized. Therefore, the authentication/privacy password
configured in the SNMP management application must be a non-localized
password in ASCII format.
• Before enabling SNMPv3, ensure that all desired community strings are
configured for SNMPv3 access. If the community strings are not configured
for SNMPv3, then SNMP access will be lost.
QSA Rev 2 and RFCN support
With firmware 08.xx and later, standards-based support for the revision 2 of Query
Security Attributes (QSA) and new remote fabric change notifications (RFCNs) is
available.
Director and Edge Switch release notes
7