HP StorageWorks
8Gb Simple SAN Connection
Kit quick start instructions
© Copyright 2008–2009 Hewlett-Packard Development Company,
L.P.
Fifth edition: July 2009
Product names mentioned herein may be trademarks of their
respective companies.
The information in this document is subject to change without notice.
Microsoft and Windows are U.S. registered trademarks of Microsoft
Corporation.
Java is a U.S. trademark of Sun Microsystems, Inc.
Printed in the U.S.
www.hp.com
*5697-0082*
Congratulations on your purchase of the 8Gb
Simple SAN Connection Kit. This document
provides procedures for installing the kit
components, including the HP StorageWorks
8/20q Fibre Channel Switch, the host bus
adapters (HBAs), and the HP StorageWorks
Simple SAN Connection Manager (Simple SAN
Connection Manager) software bundle on a
Windows or Linux system.
Verify contents and requirements
1.
Verify the package contents.
The 8Gb Simple SAN Connection Kit is shipped with the
following items and quantities:
• One quick start instructions (this document)
• One Read-Me-First document
• One End User License Agreement (EULA)
• One HP StorageWorks 8/20q Fibre Channel Switch
Rack-Mount Kit quick start installation instructions
• One HP StorageWorks Simple SAN Connection Manager
software CD, which includes HP Enterprise Virtual Array (EVA)
Management, Modular Smart Array (MSA) Management,
and other related software components
• One HP StorageWorks 8/20q Fibre Channel Switch
• One HP StorageWorks 8/20q Fibre Channel Switch
Rack-Mount Kit
• Four rubber mounting feet for the HP StorageWorks 8/20q
Fibre Channel Switch (for desktop placement, if you are not
using the rack-mount kit)
• Ten 8 Gb shortwave fiber optic transceivers
• Six 5m LC-LC Multi-Mode Fibre Channel (FC) cables
• Four 8 Gb HP StorageWorks 81Q PCI Express (PCIe) Fibre
Channel HBAs (PCIe x8 physical connector)
• Four low-profile HBA mounting brackets
• One standard power cord
• One HP Power Distribution Unit (PDU) power cable
• One serial cable
2.
Verify that the server running your management software
(management station) meets the following minimum requirements
for supporting the software (including Simple SAN Connection
Manager and other HP software):
• Operating system:
• Windows Server 2003 R2 x64/x86 with SP2 and
Microsoft hotfix QFE932755 (updated Storport storage
driver). The update is available on the Microsoft website:
http://support.microsoft.com/kb/932755.
• Windows Server 2008 x64/x86 with SP1 or later.
• 512 MB of memory
• 200 MB of disk space
• One 2.0 GHz processor
• One CD-ROM drive
• One Ethernet port
• One or more PCIe slots for the HP StorageWorks 81Q PCIe
FC HBA (or other supported QLogic FC HBA)
• Java Runtime Environment (JRE) x86 1.5 or later
Page 1
Imprimir página