HP Procurve Switch mini-GBIC XL Module Manual de instalación - Página 15
Navegue en línea o descargue pdf Manual de instalación para Interruptor HP Procurve Switch mini-GBIC XL Module. HP Procurve Switch mini-GBIC XL Module 36 páginas. Hp procurve j4852a: install guide
Imprimir páginaConnecting the Network Cables
Connect the appropriate network cables to the module's ports as shown in
the table below. For more information on the cable specifications, see
"Cables" on page 22.
Supported Cable Types
10/100-TX XL Module
twisted-pair
cable with
RJ-45
connector
Notes:
• The RJ-45 ports on this module have the HP Auto-MDIX feature. In the module's default configuration, Auto, either
a straight-through or crossover cable can be used to connect the module to any other 100Base-TX or 10Base-T
device. See the Note on page 11.
• Since the 10Base-T operation is through the 10/100Base-TX ports, if you ever want to upgrade the ports to
100Base-TX, it would be best to cable the ports initially with category 5 cable.
100/1000-T XL Module
twisted-pair
cable with
RJ-45 connector
Note: In the module's default configuration, Auto, either a straight-through or crossover cable can be used to connect
the module to either another Gigabit device or to a 100Base-T device. See the Note on page 11.
Module
RJ-45 ports with
"HP Auto-MDIX"
RJ-45 ports with
"Auto MDI/MDI-X"
Continued on the next page.
HP Procurve Switch XL Modules
Cable Type
10 Mbps operation:
100 meters
category 3, 4, or 5,
(recommended)
100-ohm differential
twisted-pair cable
100 Mbps operation:
100 meters
category 5, 100-ohm
differential twisted
pair cable
100 Mbps operation:
100 meters
category 5, 100-ohm
differential twisted
pair cable
1000 Mbps (Gigabit)
100 meters
operation: category
5E, 100-ohm cable is
recommended,
although category 5
cable may also work.
Installing the Modules
Maximum Length
9