HP StorageWorks 2/16 - SAN Switch Nota de publicación - Página 7

Navegue en línea o descargue pdf Nota de publicación para Interruptor HP StorageWorks 2/16 - SAN Switch. HP StorageWorks 2/16 - SAN Switch 32 páginas. Fabric os commands
También para HP StorageWorks 2/16 - SAN Switch: Manual de actualización (9 páginas), Manual de instrucciones de instalación (20 páginas), Manual del usuario (22 páginas), Notas de la versión del firmware (14 páginas), Nota de publicación (16 páginas), Manual de instalación (14 páginas), Nota de publicación (10 páginas), Manual de consulta rápida (5 páginas)

Important Notes

This section provides information you should be aware of when running Fabric

OS v3.1.2.

OS Requirements

HP recommends using the latest software release versions to get the greatest

benefit from the SAN.

Mixed Fabric Environment with Different Switch Platforms

Fabric OS v2.6.2, v3.1.2, and v4.2.x introduced a new switch PID format:

Extended Edge PID (Format 2). Extended Edge PID is useful if you introduce a

Fabric OS v4.2.x switch into a fabric consisting solely of Fabric OS v2.x/v3.x

switches. Before adding a Fabric OS v4.2.x switch to such a fabric, refer to the

HP StorageWorks Fabric OS 4.2.x Procedures User Guide for information on the

Extended Edge PID format.

Note:

Extended Edge PID format.

If Extended Edge PID is set (before a downgrade from the current Fabric OS

release to an earlier Fabric OS release that does not support the Extended PID

format), PID needs to be set back to a supported format, such as Core PID

(format 1) or native PID (format 0).

Advanced Web Tool Updates

The following is a list of Advanced Web Tools updates for this release:

SAN Switch 2/16 Fabric OS 3.1.2 Release Notes

Switches must operate with Fabric OS v2.6.2, v3.1.2, or v4.2.x to use the

Advanced Web Tools integrated management Graphical User Interface (GUI)

recognizes HP StorageWorks switches released after Fabric OS v3.1.2 as

generic 16-port switches.

When using a mixed fabric—that is, a fabric that contains v4.x, v3.x, and v2.x

switches—HP recommends that you use the most advanced switches to

control the fabric. For example, use the v4.x switches as the primary Fibre

Important Notes