HP StorageWorks 2/32 - SAN Switch Nota de publicación - Página 45

Navegue en línea o descargue pdf Nota de publicación para Interruptor HP StorageWorks 2/32 - SAN Switch. HP StorageWorks 2/32 - SAN Switch 48 páginas. Fabric manager version 3.0.x release notes
También para HP StorageWorks 2/32 - SAN Switch: Manual de instrucciones de instalación (20 páginas), Manual del usuario (22 páginas), Notas de la versión del firmware (14 páginas), Manual de instrucciones de instalación (6 páginas), Nota de publicación (32 páginas), Nota de publicación (14 páginas), Nota de publicación (4 páginas)

Table 9

Fabric OS 4.4.0e closed issues summary

Closed defect

Issue: Both CPs reboot at same time

after blade replacement.

Symptom: During initialization on a

Core Switch 2/64, a blade is faulted

and sysctrl tries to shut down the

blade. During this shutdown process,

the object used to reference this

blade has not been initialized

causing the CP to ASSERT due to an

invalid object

Issue: Without Fabric Watch license,

snmpd panic during mib walk.

Symptom:

run: snmpwalk -v3 -u snmpadmin1

10.64.148.56

.1.3.6.1.4.1.1588.2.1.1.1.10.1;

There will be 19000 no fabric watch

license printed, then snmpd panics.

Issue: Memory corruption when

management software sends fabric

slot information request through

msd, which causes a switch panic.

Symptom: kSWD kill of msd,

portlogdump has following entry

earlier: msd msRemQ 255 f004

00fffc7b,00fffc2c,10000060,69805

fe1 <-- GSLOTD

Issue: When there is a faulted blade

in a chassis based switch, Fabric

Manager shows the switch to be

unreachable.

Symptom: A switch is seen as

"Unknown" in FM. Unable to fully

manage switch through Fabric

Manager.

Status

Fixed

Fabric OS 4.4.0f release notes