HP StorageWorks Core Switch 2/64 Nota de publicación - Página 19

Navegue en línea o descargue pdf Nota de publicación para Interruptor HP StorageWorks Core Switch 2/64. HP StorageWorks Core Switch 2/64 24 páginas. Director power cord advisory instruction
También para HP StorageWorks Core Switch 2/64: Quickspecs (13 páginas), Nota de publicación (27 páginas), Nota de publicación (20 páginas), Nota de publicación (13 páginas), Nota de publicación (11 páginas), Instrucción (1 páginas)

Imprimir página

HP StorageWorks Core Switch 2/64 Nota de publicación

Known Issues

This section describes the known issues related to the Director 2/64 and

Director 2/140.

Embedded Web Server access to modify zones is limited to first 255

zones

If you have an active zone set of greater than 255 zones, you will not be able to

access the zones past the 255th zone using the Embedded Web Server (EWS). The

higher number zone names are listed, but when accessed to modify the zone (for

example, the zone that would be numbered "n"), you will get the zone member list

for the (n-255) zone. This will be corrected in a future firmware release.

Workaround

Using HAFM to manage directors and edge switches will allow you to modify

zones in zone sets with greater than 255 zones.

SNMP trap reports incorrect FRU position

When an SNMP trap is sent and reports a FRU position number, the reported

number is one greater than the actual FRU position that caused the SNMP trap to

be issued.

Workaround

None.

Director Release Notes

Known Issues