HP StorageWorks MSA 1000 Instalación del hardware - Página 5
Navegue en línea o descargue pdf Instalación del hardware para Interruptor HP StorageWorks MSA 1000. HP StorageWorks MSA 1000 6 páginas. Modular san array 1000 specific for tru64 unix and openvms only
También para HP StorageWorks MSA 1000: Nota de publicación (5 páginas), Instrucciones de sustitución (4 páginas), Quickspecs (17 páginas)
Imprimir página
HP StorageWorks Modular Smart Array 1000 Small Business SAN Kit
me that the status is on line, it is healthy, the size of the disk, how much free space is
available, what bus number the disk is located on and what slot number in the MSA1000
that it is located.
As you can see from looking at the SANsurfer Express software, it is quite robust
and quite a number of things that you can do in there. Now, if you are a Widows 2003
Server user, this is the one way that you can configure and manage you MSA1000.
Chapter 3: Array Configuration Utility
If you are using Windows 2000 or Linux, then you would not be able to use the
SANsurfer Express software, but you will be required to use the Array Configuration
Utility. If you remember early on in the software installation, we did install the Array
Configuration Utility; so, what we are going to do now is we are going to close out of the
SANsurfer Express software, go into the array configuration and see what we have to do
to create an array or logical drive there. So, we'll just come over and click start, go to the
Array Configuration Utility. Now, if you notice, it gives me the version number,
7.15.19.0. I see the smart array controller, which is my internal controller for my server
and I see the MSA1000 controller. So, I want to actually look at the MSA1000; so, we'll
go ahead and click here. Now, you notice that we see all the hard drives within the
MSA1000. Again, it tells me the size of the disk, what box or bus number it is located on
and the actual bay that it is located in. And if you notice, I have 14 drives. So, with the
Array Configuration Utility, the first thing that I am going to have to do is create an
array. I can either select all the drives or I can select them individually. For the purpose
of this demo, let's go ahead and select all the drive in the MSA1000. I will arrow down
and say "OK". Now, I have an array and I have unused space. The next thing I want to
do is create a logical drive. You notice the fault tolerance window. I can click and I have
the option for RAID zero, RAID one plus zero RAID five, and RAID ADG. I am going
to select RAID one plus zero. I will leave the default stripe size at 128. It is user
selectable. And I am going to designate the size of a logical drive. I don't want to use all
the space available. Leave the defaults and click "OK". Now, you notice that I have one
logical drive created. The next thing I want to do is click on save to save all the changes
that I've done, click "OK". Now, I have saved my configuration. Now the next thing
Hardware and Software Demonstration
5