HP StorageWorks SAN Switch 2/8 Power Pak Nota de publicación - Página 15
Navegue en línea o descargue pdf Nota de publicación para Interruptor HP StorageWorks SAN Switch 2/8 Power Pak. HP StorageWorks SAN Switch 2/8 Power Pak 16 páginas. San switch 2/8 version 3.0.2k release notes
También para HP StorageWorks SAN Switch 2/8 Power Pak: Nota de publicación (26 páginas)
Imprimir página
Java Plug-in
The correct Java Plug-in must be installed for the operating system installed on the
workstation.
The Java Plug-In is contained on the hp StorageWorks SAN Switch Software
v3.0.2k CD included with the switch. The plug-in is located in the FIRMWARE
subdirectory. Double-click on the JAVAPLUGIN.EXE file to begin the installation
procedure.
SNMP-based Management
Many SNMP Fibre Channel Management programs have the capability to log
SNMP trap information (error and status events) occurring on the switch into the
Windows NT application Event log. To enable this capability, parameters must be
set on the switch.
Note:
button and clicking on the SNMP Admin tab, or by using the Telnet interface along with
the agtcfgSet Telnet command.
SAN Switch 2/8 Version 3.0.2k Release Notes
Windows 95, 98, 2000, or NT:
Java Plug-in version 1.3.1_01 is required for the SAN Appliance.
Solaris:
Java Plug-in version 1.2.2-02 for Solaris, including the Java Plug-in patch
created by Sun Microsystems for Solaris, is required.
These parameters can be set either through Web Tools by selecting the admin.
SNMP-based Management
15