HP StorageWorks XP10000 - Disk Array Manual del administrador - Página 39

Navegue en línea o descargue pdf Manual del administrador para Interruptor HP StorageWorks XP10000 - Disk Array. HP StorageWorks XP10000 - Disk Array 50 páginas. Cache lun xp
También para HP StorageWorks XP10000 - Disk Array: Nota de publicación (13 páginas), Manual de configuración (42 páginas), Manual de configuración (40 páginas), Manual de configuración (40 páginas), Manual de configuración (36 páginas), Manual de configuración (36 páginas), Manual de configuración (30 páginas), Manual de configuración (36 páginas), Nota de publicación (5 páginas), Manual de configuración del sistema (49 páginas), Manual de configuración del sistema (43 páginas), Manual de configuración del sistema (42 páginas), Manual de configuración del sistema (35 páginas), Manual de configuración (46 páginas), Manual de configuración (46 páginas), Manual de configuración (40 páginas), Manual de configuración (44 páginas), Manual de configuración (38 páginas), Manual de configuración (34 páginas), Manual de configuración (30 páginas), Manual de configuración (30 páginas), Manual de configuración (42 páginas), Manual del usuario (30 páginas)

6 Troubleshooting HP StorageWorks XP

Virtualization Adapter

Use the following solutions to troubleshoot general issues:

XP disk arrays do not appear in Site Recovery Manager

Solutions

If XP disk arrays are not appearing in Site Recovery Manager, make sure that Site Recovery

Manager has been restarted (see step 3 in

Make sure that the array manager that SRM is connected to is actively managing arrays.

XP Virtualization Adapter does not install

Solution - Check that SRM is installed. HP StorageWorks XP RAID Manager XP Virtualization Ad-

apter will not install if SRM is not on the disk array.

Virtual machines do not start at recovery site after failover.

Cause - The ESX recovery hosts are not configured with the correct HBA port WWN on the recovery

XP.The replicated LUNs used in failover were not presented to the recovery ESX servers.

Virtual machines do not start at recovery site during failover testing

Cause - The ESX recovery hosts are not configured with the correct HBA port WWN on the recovery

XP.

XP Virtualization Adapter error messages are identified in the SRM log files with XP Virtualization

Adapter shown in the message. To identify the XP Virtualization Adapter error messages, search the

SRM log files for XP Virtualization Adapter.

SRM log file is located in the following directory (default):

C:\Documents and Settings\All Users\Application Data\VMware\VMware Site

Recovery Manager\Logs\vmware*.log

NOTE:

•

Logs rollover after reaching 5 MB by default

•

vmware-dr-index contains the most recent Log File number

"Installation

procedures" on page 23).

XP Virtualization Adapter Administrator Guide