HP StorageWorks XP12000 Manual de configuración del sistema - Página 39

Imprimir página

HP StorageWorks XP12000 Manual de configuración del sistema

OFC

OPEN-

path

port

RAID

remote console PC

Remote Control

(RC)

Remote Web Con-

sole (RWC)

R-SIM

SCSI

SIM

SNMP

SVP

TID

Volume

Disk Array XP operating system conﬁguration guide: Windows 2000/2003

Open Fibre Control.

A general term describing any one of the supported OPEN

emulation modes (for example, OPEN-L).

Operating system.

Physical address.

"Path" and "LUN" are synonymous. Paths are created by

associating a port, a target, and a LUN ID with one or more

LDEVs.

A physical connection that allows data to pass between a

host and the disk array. The number of ports on an XP disk

array depends on the number of supported I/O slots and the

number of ports available per I/O adapter. The XP family of

disk arrays supports Fibre Channel (FC) ports as well as other

port types. Ports are named by port group and port letter, such

as CL1-A. CL1 is the group, and A is the port letter.

Redundant array of independent disks.

The PC running HP StorageWorks Remote Control XP.

HP StorageWorks Remote Control XP. A software product used

for managing XP arrays.

HP StorageWorks XP Remote Web Console. A browser-based

program installed on the SVP that allows you to conﬁgure and

manage the disk array.

Remote service information message.

Small computer system interface.

Service information message.

Simple Network Management Protocol.

Service processor, which is the PC built into the disk controller.

The SVP provides a direct interface into the disk array. SVP use

is reserved for HP support representatives only.

Terabyte.

Target ID.

On the XP array, a volume is a uniquely identiﬁed virtual

storage device composed of a control unit (CU) component

and a logical device (LDEV) component separated by a colon.

For example 00:00 and 01:00 are two uniquely identiﬁed