HP V1910 Manual de introducción - Página 23
Navegue en línea o descargue pdf Manual de introducción para Interruptor HP V1910. HP V1910 44 páginas.
Imprimir página
Installing the switch into a 19-inch rack
The V1910 Switch Series is shipped with a pair of mounting brackets to fix and support the switch.
12
shows how to install a V1910 into a 19-inch rack.
Figure 12 Install a V1910 into a 19-inch rack
Introduction to mounting brackets
Table 14 Mounting brackets for the V1910 Switch Series
Model
HP V1910-16G Switch
JE005A
HP V1910-24G Switch
JE006A
HP V1910-48G Switch
JE009A
HP V1910-24G-PoE
(170W) Switch JE008A
HP V1910-24G-PoE
(365W) Switch JE007A
Figure 13 Mounting brackets
1
(A)
(1) Screw hole used to fix the mounting bracket to the rack (with an M6 screw)
(2) Screw hole used to fix the switch to the mounting bracket
Attaching the mounting brackets to the switch
CAUTION:
The installation of mounting brackets varies depending on your switch model.
Mounting
Appearance
brackets
Provided
See callout A
by default
in
Figure 13
Provided
See callout B
by default
in
Figure 13
2
Mounting position
Front or rear part of the
chassis's side
Front or rear part of the
chassis's side
Front, center, or rear part of
the chassis's side
Front, center, or rear part of
the chassis's side
1
(B)
16
Description
See
Figure 14
Figure 15
See
Figure 16
Figure 18
See
Figure
Figure
17, and
Figure 18
2
Figure
and
and
16,