HP XP20000/XP24000 Manual de configuración - Página 9

Navegue en línea o descargue pdf Manual de configuración para Interruptor HP XP20000/XP24000. HP XP20000/XP24000 40 páginas. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
También para HP XP20000/XP24000: Nota de publicación (13 páginas), Manual de integración (29 páginas), Nota de publicación (4 páginas), Manual del administrador (50 páginas), Manual de configuración (42 páginas), Manual de configuración (40 páginas), Manual de configuración (36 páginas), Manual de configuración (36 páginas), Manual de configuración (30 páginas), Manual de configuración (36 páginas), Nota de publicación (5 páginas), Manual de configuración (46 páginas), Manual de configuración (46 páginas), Manual de referencia (46 páginas), Manual de configuración (40 páginas), Manual de configuración (44 páginas), Manual de configuración (38 páginas), Manual de configuración (34 páginas), Manual de configuración (30 páginas), Manual de configuración (30 páginas)

SNMP configuration

The XP family of disk arrays and the SVS 200 support standard Simple Network Management Protocol

(SNMP) for remotely managing arrays. The SNMP agent on the service processor (SVP) performs

error-reporting operations requested by the SNMP manager. SNMP properties are usually set from

the SVP but they can also be set remotely using XP Remote Web Console or XP Command View

Advanced Edition Software. Refer to the applicable user's guide for procedures.

Figure 1 SNMP configuration

HP StorageWorks XP RAID Manager manages HP StorageWorks XP Business Copy Software or HP

StorageWorks XP Continuous Access Software operations from a host server. To use RAID Manager

you must designate at least one LDEV as a command device. This can be done with Remote Web

Console or XP Command View Advanced Edition Software. Refer to the applicable user guide for

information about how to designate a command device.

Creating scripts to configure all devices at once may save you considerable time.

Perform these actions to install and configure the disk array:

Installing and configuring the disk array

Setting the host mode and host group mode

Configuring the Fibre Channel ports

Setting the system option modes

Installing and configuring the host

Installing and configuring the FCAs

Loading the operating system and software

Clustering and fabric zoning

Fabric zoning and LUN security for multiple operating systems

Connecting the disk array

Restarting the Linux server

Verifying new device recognition

Defining the paths

XP Disk Array Configuration Guide for Linux