HP XP20000/XP24000 Manual de configuración - Página 8

Navegue en línea o descargue pdf Manual de configuración para Interruptor HP XP20000/XP24000. HP XP20000/XP24000 36 páginas. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
También para HP XP20000/XP24000: Nota de publicación (13 páginas), Manual de integración (29 páginas), Nota de publicación (4 páginas), Manual del administrador (50 páginas), Manual de configuración (42 páginas), Manual de configuración (40 páginas), Manual de configuración (40 páginas), Manual de configuración (36 páginas), Manual de configuración (30 páginas), Manual de configuración (36 páginas), Nota de publicación (5 páginas), Manual de configuración (46 páginas), Manual de configuración (46 páginas), Manual de referencia (46 páginas), Manual de configuración (40 páginas), Manual de configuración (44 páginas), Manual de configuración (38 páginas), Manual de configuración (34 páginas), Manual de configuración (30 páginas), Manual de configuración (30 páginas)

Connection speeds of 1 Gbps, 2 Gbps, and 4 Gbps

Short-wave non-OFC (open fiber control) optical interface

Multimode optical cables with SC or LC connectors

Public or private arbitrated loop (FC-AL) or direct fabric attach

Fibre Channel switches

Even though the interface is Fibre Channel, this guide uses the term "SCSI disk" because disk array

devices are defined to the host as SCSI disks.

Device emulation types

The XP family of disk arrays and the SVS 200 support these device emulation types:

OPEN-x devices: OPEN-x logical units represent disk devices. Except for OPEN-V, these devices

are based on fixed sizes. OPEN-V is a user-defined size based on a CVS device. Supported

emulations include OPEN-3, OPEN-8, OPEN-9, OPEN-E, OPEN-L, and OPEN-V devices.

LUSE devices (OPEN-x*n): Logical Unit Size Expansion (LUSE) devices combine 2 to 36 OPEN-x

devices to create expanded LDEVs larger than standard OPEN-x disk devices. For example, an

OPEN-x LUSE volume created from ten OPEN-x volumes is designated as OPEN-x*10.

CVS devices (OPEN-x CVS): Volume Size Configuration (VSC) defines custom volumes (CVS) that

are smaller than normal fixed-sized logical disk devices (volumes). (OPEN-V is a CVS-based custom

disk size that you determine. OPEN-L does not support CVS.) Although OPEN-V is a CVS-based

device, the product name in the SCSI inquiry string is OPEN-V opposed to the fixed size OPEN-

[389E] devices that appear as OPEN-x-CVS.

LUSE (expanded) CVS devices (OPEN-x*n CVS): LUSE CVS combines CVS devices to create an

expanded device. This is done by first creating CVS custom-sized devices and then using LUSE to

combine from 2 to 36 CVS devices. For example, if three OPEN-9 CVS volumes are combined to

create an expanded device, this device is designated as OPEN-9*3-CVS. OPEN-V devices are

designated as OPEN-V*n (without CVS).

NOTE:

For the SVS 200, and the XP24000/XP20000/XP12000/XP10000 when connected to external

storage devices, HP recommends using OPEN-V as the emulation the array makes visible to the host.

This allows configuration of external storage LDEVs without losing data. Using any other emulation

may cause data loss in the external storage LUNs. For new deployments, OPEN-V should be chosen

because some features (such as HP StorageWorks XP Snapshot Software or HP StorageWorks XP

Continuous Access Journal Software) are only supported with OPEN-V.

For detailed information, see

The XP family of disk arrays is supported with OpenVMS's resident Multipath software, which provides

I/O path failover.

The XP family of disk arrays and the SVS 200 support standard Simple Network Management Protocol

(SNMP) for remotely managing arrays. The SNMP agent on the service processor (SVP) performs

Installing and configuring OpenVMS for the XP disk array

"Emulation

specifications" on page 27.