HP XP20000/XP24000 Manual de configuración - Página 18

Navegue en línea o descargue pdf Manual de configuración para Interruptor HP XP20000/XP24000. HP XP20000/XP24000 40 páginas. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
También para HP XP20000/XP24000: Nota de publicación (13 páginas), Manual de integración (29 páginas), Nota de publicación (4 páginas), Manual del administrador (50 páginas), Manual de configuración (42 páginas), Manual de configuración (40 páginas), Manual de configuración (40 páginas), Manual de configuración (36 páginas), Manual de configuración (36 páginas), Manual de configuración (30 páginas), Manual de configuración (36 páginas), Nota de publicación (5 páginas), Manual de configuración (46 páginas), Manual de configuración (46 páginas), Manual de referencia (46 páginas), Manual de configuración (44 páginas), Manual de configuración (38 páginas), Manual de configuración (34 páginas), Manual de configuración (30 páginas), Manual de configuración (30 páginas)

Figure 3 Multi-cluster environment

Within the Storage Area Network (SAN), the clusters may be homogeneous (all the same operating

system) or they may be heterogeneous (mixed operating systems). How you configure LUN security

and fabric zoning depends on the operating system mix and the SAN configuration.

Fabric zoning and LUN security for multiple operating systems

You can connect multiple clusters of various operating systems to the same switch and fabric using

appropriate zoning and LUN security as follows:

•

Storage port zones may overlap if more than one operating system needs to share an array port.

•

Heterogeneous operating systems may share an XP array port if you use Secure Manager and set

the appropriate host group and mode. All others must connect to a dedicated XP array port.

•

Use Secure Manager for LUN isolation when multiple hosts connect through a shared array port.

Secure Manager provides LUN security by allowing you to restrict which LUNs each host can

access.

Table 4 Fabric zoning and LUN security settings

Environment

Standalone SAN

(non-clustered)

Clustered SAN

Multi-Cluster SAN

The HP service representative connects the disk array to the host by:

•

Verifying operational status of the disk array channel adapters, LDEVs, and paths.

•

Connecting the Fibre Channel cables between the disk array and the fabric switch or host.

•

Verifying the ready status of the disk array and peripherals.

Installing and configuring Linux for the XP disk array

OS Mix

homogeneous (a single OS type

present in the SAN)

heterogeneous (more than one OS

type present in the SAN)

Fabric Zoning

Not required

Must be used when

multiple hosts or cluster

nodes connect through a

Required

shared port

LUN Security