HP Xw460c - ProLiant - Blade Workstation Manual de aplicación - Página 32

Navegue en línea o descargue pdf Manual de aplicación para Interruptor HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 35 páginas. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
También para HP Xw460c - ProLiant - Blade Workstation: Manual de prevención de errores (12 páginas), Libro Blanco técnico (12 páginas), Actualización del firmware (9 páginas), Manual de instalación (2 páginas), Manual de preguntas frecuentes (14 páginas), Póster de instalación (9 páginas), Manual de instalación (33 páginas), Manual de gestión (28 páginas), Manual de hardware (23 páginas), Visión general (35 páginas), Manual del usuario (33 páginas), Manual de optimización (13 páginas), Garantía limitada (10 páginas), Manual de instrucciones de instalación (10 páginas), Manual de instrucciones de instalación (8 páginas), Instrucciones de instalación (4 páginas), Instrucciones de instalación (2 páginas)

Issue 20

Adding an EISA fibre channel controller

Description

Solution

With the server shut down and power removed from the server, install the EISA

fibre channel controller in the server by following the procedures detailed below

in the "Solution."

To install the controller:

1. Run the System Configuration Utility to add the controller and configure

changes to system BIOS.

2. Restart the server.

3. Start the hardware wizard by right clicking on My Computer | Properties |

Hardware.

4. Select Add/Troubleshoot a Device. No devices will be found.

5. Select Add New Device from the Choose Hardware Device screen.

6. Select No, I want to select hardware from a list.

7. Select SCSI and RAID Controllers.

8. Select HP and HP Fibre Channel Host Controller (non PnP).

9. Click Next | Finish.

10. Restart the server.

To load the driver:

After the restart completes, the Found New Hardware wizard will display.

This process resolves the device listed as Unknown Device under the Device

Manager tree. This Unknown Device, the HP Fibre Channel Controller /E,

requires the CPQFCALM.SYS driver

NOTE

The device HP Fibre Channel

Host Controller (non PnP),

displayed under Device Manager

with a yellow exclamation point,

can now be removed from the

Device Manager tree.