Panasonic PT-AE1000 Manual de instrucciones - Página 10
Navegue en línea o descargue pdf Manual de instrucciones para Proyector Panasonic PT-AE1000. Panasonic PT-AE1000 28 páginas. Panasonic lcd projector operating instructions
También para Panasonic PT-AE1000: Manual de instrucciones (28 páginas)
Imprimir página
peripheral device.
>n page 45.
tly to the audio reproduction system.
EO/S-VIDEO
To video
output
To S-video
output
) player
DVD player
Switching the projector on/off
Mains lead
Ensure all the input devices are connected and turned off before connecting the Mains lead.
H Connecting
Make sure using the Mains
lead
which is provided with
-
the projector.
1.
Ensure the shape of the
mains plug and the AC
IN
connector on the side
of the projector match, then push the plug all
the way in.
2. Connect the
Mains lead
to a wall socket.
| Disconnecting
Make sure the MAIN POWER is switched off.
1.
Hold the plug and unplug the
Mains lead
from the wall socket.
2. Hold the plug and unplug the
Mains lead
from the AC
IN
connector on the side of the
projector.
NOTE:
• Do not force the connector as this may damage the projector and/or the mains lead.
• Dirt or dust build-up around plugs may cause fire or electrical hazards.
• Switch off the power to the projector when not in use.
POWER indicator
POWER
indicator
Indicator status
No illumination or flashing
■
The
MAIN
POWER is switched off
The
MAIN
POWER is switched on and the projector is standby.
The POWER is switched on and the projector is getting ready to project.
The projector is ready to project.
The POWER is switched off and the projector is cooling the lamp.
The POWER is switched on again when cooling the lamp and recovering
to projection mode. Recovery may take a while.
NOTE:
• While the projector is cooling the lamp, do not switch the MAIN POWER off or unplug the
Mains lead.
• The electric consumption in standby mode is 0.08 W.
RED
Lit
nPFFM
Flashing
Lit
Lit
ORANGE
Flashing
English -19