Panasonic PT-D10000 Series Especificaciones - Página 3

Navegue en línea o descargue pdf Especificaciones para Proyector Panasonic PT-D10000 Series. Panasonic PT-D10000 Series 12 páginas. 3-chip dlp projector
También para Panasonic PT-D10000 Series: Hoja de especificaciones (10 páginas), Hoja de especificaciones (10 páginas), Especificaciones (12 páginas), Dimensiones (1 páginas), Dimensiones (1 páginas), Manual de ajuste (17 páginas), Garantía limitada (1 páginas), Especificaciones (6 páginas), Manual de instalación y funcionamiento (37 páginas)

Imprimir página
Panasonic PT-D10000 Series Especificaciones
S
F
P
E
C
I
L
3-Chip DLP™ Projector

VIDEO OUT:

S-VIDEO IN:
LAN:
SERIAL IN *

SERIAL OUT *

REMOTE 1 IN:
REMOTE 1 OUT:
REMOTE 2 IN:
Optional board slot *
5
:
With ET-MD77SD1 installed:
With ET-MD77SD3 installed:
With ET-MD77DV installed:
Power cord:
Cabinet material:
Dimensions (W x H x D):
Weight*
6
:
Operating temperature*
7
:
Operating humidity:
As of November 2008
E
BNC x 1, 1.0 Vp-p, active through
Mini DIN 4-pin x 1
Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms (S1 signal compatible)
RJ-45 x 1, 10Base-T/100Base-TX, compatible with PJLink™ (class 1)
4
:
D-sub 9-pin (female) x 2, for external control (RS-232C/RS-422 compli-
ant)
4
:
D-sub 9-pin (male) x 1, for link control (RS-422 compliant)
M3 jack x 1 for wired remote control
M3 jack x 1 for link control
D-sub 9-pin x 1 for external control (parallel)
SERIAL IN:
BNC x 1, SD-SDI signal (4:2:2), SMPTE 259M compliant, 480i, 576i
SERIAL OUT:
BNC x 1, active through
SERIAL IN:
BNC x 1
SD-SDI signal (4:2:2): SMPTE 259M compliant, 480i, 576i
Single-link HD-SDI signal (YP
720/50p, 720/60p, 1080/50i, 1080/60i, 1080/25p, 1080/24p,
1080/24sF, 1080/30p
SERIAL OUT:
BNC x 1, active through
DVI-D IN:
DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, single link
EDID1: 480p, 576p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF,
1080/25p, 1080/30p, 1080/60p, 1080/50p, 720/60p, 720/50p
EDID2: Compatible with non-interlaced signals only,
Effective resolution: VGA (640 x 480) – U-XGA (1,600 x 1,200)
Dot clock: 25–162 MHz
NOTE: LAN terminals on the optional board can not be used. Use the LAN terminal
3 m/9.8´
Moulded plastic
578 x 320 x 643 mm (22-3/4˝ x 12-19/32˝ x 25-5/16˝) (without lens)
Approx. 32 kg (70.5 lbs) (without lens)
0°–45°C (32°–113°F)
10%–80% (no condensation)
P
B
R
on the projector.
PT-D10000
4:2:2 10-bit): SMPTE 292M compiant,
< 3 >