Diamond Tech International Power Max II Manual de instrucciones - Página 2
Navegue en línea o descargue pdf Manual de instrucciones para Amoladora Diamond Tech International Power Max II. Diamond Tech International Power Max II 6 páginas. Glass grinder
Imprimir página
POWER MAX II INSTRUCTION MANUAL
Before You Begin
Read and follow all instructions carefully.
• After unpacking all components, assemble grinder on a firm level surface to prevent grinder
from tilting and rocking.
• Be sure the power switch is in the OFF position before plugging in the grinder.
• Always disconnect grinder from electrical outlet before setting up or servicing.
• Wear proper apparel. Never wear loose fitting clothes, neckties, jewelry and gloves that may
get caught in moving parts.
• Always wear safety goggles. Everyday eyeglasses have only impact resistant lenses they are
not safety glasses.
• Never turn on grinder while glass or working materials are touching the bits or disks.
• Keep out of reach of children.
• Never leave grinder running unattended. Turn power OFF when not in use.
• Do not operate while under the influence of medication or alcohol.
• To ensure top performance keep grinder properly maintained and lubricated.
Contents
Your Power Max II Grinder™ has been shipped partially assembled. Carefully remove grinder
and parts from the packaging.
1- Grinder Body
2- Two Grind Surface Adaptors
3- 1/4" Silver Bullet™ Bit
4- 1" Silver Bullet™ Bit
5- Advanced Super Sponge™
6- Easy Glide Work Surface
7- Hex Wrench
8- Anti-Seize Lubricant
Deluxe Model Also Includes:
1 - Universal Face Shield
2 - Easy-On-Footswitch
3 - Step-Up Work Surface
Assembly Instructions
A. Bit Installation
1) Before installing the grinder bit, lubricate the top of the motor
shaft and inside the bit by applying a thin coating of anti-seize
lubricant.
2) Slide the bit onto the motor shaft, positioning the set screw
over the flat side of the motor shaft (Fig. 1). Position the bit on the
shaft so at least 1/8" of the diamond surface is exposed above
- PAGE 2
6
8
2
3
2
4
3
5
7
1
Fig.1