Panasonic PT-FW100NTEA Manual del usuario - Página 31
Navegue en línea o descargue pdf Manual del usuario para Proyector Panasonic PT-FW100NTEA. Panasonic PT-FW100NTEA 49 páginas. Secondary display transmission function
También para Panasonic PT-FW100NTEA: Especificaciones (6 páginas), Manual rápido (1 páginas), Manual rápido (1 páginas), Manual de funcionamiento avanzado (33 páginas), Especificaciones (6 páginas)
Network setting of the projector
Additionally perform the following setting using the [AUTHENTICATION] setting.
WIRELESS DETAILED SETUP
USER1
DEFAULT KEY
KEY1
KEY2
KEY3
RETURN
KEY4
SELECT
RETURN
When setting [OPEN] or [SHARED] as authentication and setting [WEP
DEFAULT KEY : Set 1 – 4 numerals for the default key.
KEY 1 – 4
: Set these to match the WEP key registered in [DEFAULT KEY].
Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input five alphanumerics (or a 10-digit
string for the hexadecimal format) for the 128-bit key, input 13 alphanumerics (or a 26-digit string for the
hexadecimal format).
When setting [WPA-PSK
Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.
※ "Glossary" (See page 45)
Important video/audio data is protected because AES
even if [ENCRYPTION] is set to [NONE].
※ "Glossary" (See page 45)
Default settings of [USER1]-[USER3]
The following settings as [USER1]-[USER3] in the wireless LAN are set before the projector leaves the factory.
SSID
: Panasonic Projector
DHCP
: OFF
IP ADDRESS
: 192.168.11.100
SUBNETMASK
: 255.255.255.0
GATEWAY
: 192.168.11.1
MODE
: AD HOC
AUTHENTICATION : OPEN
ENCRYPTION
: NONE
3/3
1
* * * * * * * *
* * * * * * * *
* * * * * * * *
* * * * * * * *
OK
CANCEL
※
] as authentication : Set key and select [OK].
※
(cont.)
] as the encryption method:
※
encryption processing takes place in advance for all network numbers,
31