Panasonic PT-JX200WE Manual de instrucciones de instalación - Página 24

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Proyector Panasonic PT-JX200WE. Panasonic PT-JX200WE 30 páginas.

Installation (continued)

r Install the projector to a ceiling

Shaft

Groove

Ball joint

fixing screw

Shaft

24 - ENGLISH

Attachment plate

Projector mount bracket

Groove

1) Changing the orientation of the main unit of

the projector.

z Refer to "Changing the orientation of the

main unit of the projector" ( page 19),

adjust the orientation of the main unit of the

projector as shown in the left illustration and

then fasten the ball joint fixing screw.

2) Attach the groove of the projector mount

bracket to the shaft of the attachment plate.

Warning:

The mounting and installation must be carried

out by two or more persons.

3) Attach the projector mount bracket to the

attachment plate.

z Slide the projector mount bracket and make

the groove of the projector held on to the

shaft of the attachment plate.

Attention

z Do not release your hand until the

attachment plate is fitted into both sides (the

shaft side and the hook side) of the projector

mount bracket.

Hook

4) Secure the projector mount bracket to

the attachment plate with the screws and

captive washers.

z Firmly secure the projector mount bracket

with the four supplied screws and captive

washers (M4 x 8).